Deep Red by Brian Stroh

April 7, 2016 | Featured builds & mods | Atila Gobor
Share on social:

Following last week Vulture Red Flakse, we continue this week in similar fashion! We are featuring a Deep Red build by Brian Stroh (@BPS_Customs on Twitter), who is also running his YouTube channel Ess Tech TV. Cable management par excellence and perfect bends, don’t you think? Enjoy and leave a comment below.

1

Hardware

Phanteks Enthoo Evolv ATX
ASUS Sabertooth X99
Intel i7-5820k @ 4.6ghz
64gb GSkill DDR4 (8x8gb)
2x MSI GTX 980ti Gaming 6g @ 1500mhz
Samsung 850 Evo 500gb SSD & Western Digital Blue 1TB HDD.
Corsair HXI HX1000i
NZXT Hue+
Fans – Corsair SP120 x3, Scythe Slipstream 120 x3

3

8 (1)

2

6

EK parts used in this build

EK-XRES 140 Revo D5
EK-Supremacy MX
EK-FC980 GTX Ti TF5 GPU water block (x2)
EK-FC980 GTX TF5 Backplate – Nickel (x2)
EK-Coolstream PE 360 Radiator
EK-Coolstream PE 240 Radiator
EK-AF Angled 2×45° G1/4 Nickel
5 x EK-AF Angled 90° G1/4 Nickel
14 x EK-HDC Fitting 12mm G1/4 – Nickel
EK-AF Y-Splitter Rotary 2F-1M G1/4 – Nickel
4 x EK-PLUG G1/4
EK-HD Tube 10/12mm 3-Slot
EK-AF Ball Valve (10mm) G1/4 – Black
EK-ACF Fitting 10/16mm Nickel
EK-AF Angled 45° G1/4 Nickel
EK-Ekoolant EVO Blood RED

7

PS: All photos were taken by Nick Stroh, Brians brother.

1 reply
  1. Dmitriy Brovkin
    Dmitriy Brovkin says:

    I only have one question. Where are the other 3 fans? I know that the front is two and I see the rear by blowing. The rest of the Scythe Slipstream 120 x3 stand over the EK-CoolStream PE 360? I have the same case, and I could not mount the fans above the basket.

    In the photo they are not installed?

Comments are closed.