Ek Water Blocks Cooling Solutions

Water Blocks

    EK-Supremacy and EK Supreme LTX
    EK-Supremacy, a direct successor of EK-Supreme HF, is an unrivaled top performance universal water block. Fits all modern CPU sockets and is equipped with a universal mounting mechanism that offers error-preventing, tool-less installation. EK-Supremacy is a result of round clock development, years of experience and rigorous testing. As a new EK flagship this product again combines top hydraulic and thermal performance.

     

    The EK-Supremacy cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate's nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. Specifically designed and carefully machined copper base (sometimes referred to as ‘cold plate’) is made from purest copper available on the market and is further polished to absolute mirror finish. This alone greatly improves the cooling performance of EK-Supremacy.

     

    EK-Supremacy is also the first CPU water block on the market which has been optimized for every modern CPU platform independently with the use of different type of jet plates to ensure the best contact with the CPU integrated heat spreader (IHS). These jet plates of different shape and thickness are enclosed with the product.

     

     

     

     


     

    Full Cover Blocks
    The Full Cover blocks are designed for the die-hard enthusiasts that seek an all-in-one cooling solution for their graphics card. The main advantage is that all heat generating components on the graphics card that need cooling are being cooled by a single cooling unit - a Full Cover water block.

    The base of the block is made of SE CU electrolytic copper. The Full Cover water blocks cooling engine uses a narrow microchannel fin design for maximum cooling performance required by the enormous heat generated by modern day graphics processing units. All EK Full Cover water blocks are engineered with high flow rates in mind as well. The low pressure drop of EK Full Cover water blocks ensures great cooling performance even when low power water pumps are employed.

    We recommend 1/2" (12mm) ID tubing or 3/8" (10mm) ID tubing.


     

     

     

     

    Full Board Water Blocks
    The latest additions to the EK family are Full Board water blocks based upon the same design concept as Full-Cover water blocks. These all-in-one motherboard cooling solutions provide cooling to all of motherboard's critical heat generating components such as VRM (voltage regulation module), northbridge/southbridge and other types of periphery connecting hub chipsets. These type of motherboard allow for easy tube routing due to their design. No additional tubing and fittings are needed since the solution uses only two standard in- and out- ports.

     

    Although it may seem that these type of water blocks pose high hydraulical restriction EK design always puts great effort to minimize the pressure drop and to further ensure the best cooling possible. Full Board blocks are the best thing any motherboard could wish for!



     

     

    Chipset Water Blocks
    The high performance, low pressure drop water block was first made especially for cooling the chipset on nVidia nForce 4 series motherboards, such as the DFI nF4 Ultra, -SLI-DR and many others. Since then the demand for these type of water blocks have only increased. Today EK manufactures many variants of EK-NB/SB series water block to ensure greatest compatibility. The position of the chipset cooler demands a unique, low profile form of water block ensuring that the block does not interfere with the graphics card in any PCI-Express slot, especially those running in SLI or CrossFire mode. The block has a low pressure drop and provides far better performance than what any Northbridge needs.

    We recommend 1/2” (12mm) ID tubing or 3/8” (10mm) ID tubing.
     

       


    Mosfet Water Blocks
    The newest high-end motherboards also require active MOSFET (VRM) cooling, especially when subjected to high overclock conditions. EK offers various type of MOSFET water blocks for the most popular modern motherboards of both platforms - AMD and Intel.

    We recommend 1/2" (12mm) ID tubing or 3/8" (10mm) ID tubing.
     

       

     

     

Newsletter

Sign up for sale offers & news


Poll

What type of graphics card is your primary graphics card?


PR

Feedback

I understand that this form is only for reporting errors and sending suggestions about new EK website. Any messages with request for support need to be sent through our ticketing system.