You have no items in your shopping cart.
White Warlock
This spellbinding PC build is based on ASUS® ROG™ hardware and perfected with the signature EK Quantum water cooling. Nestled inside the White ROG Hyperion case are White Edition Velocity² and Vector² water blocks, white Surface radiators, and Satin Titanium accents in the form of clear hardline tubing and fittings. Blue coolant and compression rings add to the build's overall magic, while EK-Matrix7 compatibility makes it easy to replicate.
About the Build
CPU Cooling
- EK-Quantum Velocity² Edge D-RGB - AM5 Black Special Edition
GPU Cooling
- EK-Quantum Vector² Strix/TUF RTX 4090 D-RGB - White Edition
Radiators and Fans
- 2x EK-Quantum Surface S420 - White
- 7x EK-Loop Fan FPT 140 D-RGB - White (600-2200rpm)
Distribution Plate
- EK-Quantum Reflection² ROG Hyperion D5 PWM D-RGB - Plexi
Fittings and Tubing
- EK-Quantum Torque fittings in Satin Titanium with Blue Colored Rings
- EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90° - Acrylic
Loop Connections
- Inlet port: Begin with a 28mm extender and a 90° rotary adapter connected to the inside port of the front radiator. Use an HDC 14 fitting to connect a pre-bent tube, leading to another HDC 14 fitting installed on the distribution plate.
- Outlet port: Use a 28mm extender and a 90° rotary adapter for the outside port of the front radiator. Connect a tube using an HDC 14 fitting, then link to another HDC 14 fitting, a 90° rotary adapter, a 7mm extender, and a 14mm extender installed on the distribution plate.
- Inlet port: Start with a 28mm extender and a 90° rotary adapter on the inside port of the top radiator. Use an HDC 14 fitting to connect tubing to the top radiator, then link another HDC 14 fitting, a 90° rotary adapter, a 7mm extender, and a 14mm extender on the distro plate.
- Outlet port: Employ a 28mm extender and a 90° rotary adapter on the outside port of the top radiator. Use an HDC 14 fitting to connect pre-bent tubing to the top radiator, then link to an HDC 14 fitting on the distro plate.
- Right port: Fit a 90° rotary adapter to the right port of the GPU block, followed by an HDC 14 fitting. Connect a pre-bent tube to another HDC 14 fitting installed on the distribution plate.
- Left port: Utilize a 28mm extender and a 90° rotary adapter on the left port of the GPU block, followed by an HDC 14 fitting. Connect a pre-bent tube to another HDC 14 fitting installed on the distribution plate.
- Both ports: Both ports: Attach a 3mm offset and a 90° rotary adapter to each port of the CPU block, followed by an HDC 14 fitting. Connect pre-bent tubes to HDC 14 fittings on the distro plate.
- PC Case: ASUS ROG GR701 Hyperion White
- Motherboard: ASUS® ROG Maximus Z790 Formula
- Graphics Card: Nvidia GeForce RTX 4090 ASUS
- RAM: G.Skill Trident Z5 RGB DDR5
- Processor: Intel® Core™ i9-14900K
- Riser:EK-Loop Vertical GPU Holder EVO - Gen4 Riser
- Cables: Cable Mod
- Compression Rings Update: The blue compression rings originally used in the White Warlock build have reached their end of life and have been replaced by new blue-colored rings.
- Tubing Update: The EK-Loop Metal Tube - Satin Titanium, originally used in the White Warlock build, has reached its end of life and has been replaced by acrylic tubing.
Connecting Front Radiator to Distro:
Connecting Top Radiator to Distro:
Connecting GPU Block to Distro:
Connecting CPU Block to Distro:
Hardware in the Sample Build:
CAUTION:
 |
|
White Warlock Loop Kit
