Why?

How?

 Buy! 

Cooling Configurator

Join us at ThinkCell

Cooled PC
Show your configuration.

Newsletter

Poll

Radiators

EK-CoolStream-RAD XTC 140mm series

EK offers since August 2010 radiators also for 140mm fans. A step up on surface and performance level EK-CoolStream RAD XTC offers top level performance and are optimized for maximum heat dispatching even at lowest fan speeds with average 10 FPI (fins per inch).

XTC 140 series rads have G1/4 ports on both sides making the radiator more flexible for extreme and unique installations. Radiators also have excentrical core placement. On one side 5mm from the surface and 9mm on oposite side. This way EK XTC radiators offers the best space usage of all radiators. EK recomends to use radiators on the side where the core is 9mm from the surface.

The radiator has integrated G1/4" threads, allowing installation of virtually all common fittings.
 

Technical details:
Material:
- Copper fins
- Brass chambers
- Connection threads: G1/4"
- Pressure tested: 2bar
- Fin densiti: 10 FPI
 

Enclosed:
1 x EK-CoolStream RAD XTC
4 x M3 x 30mm screws for each FAN position
4 x M3 x 5mm screws for each FAN position

EK-CoolStream-RAD XT 120mm series

Finally EK is ready to offer you radiators designed for hardest enthusiasts. Radiator is optimized for maximum heat dispatching even at lowest fan speeds with average 10 to 11 FPI (fins per inch). Choosing EK-CoolStream-RAD XT will give your watercooling system a boost you needed to cool your hot hardware. Since March 2010 EK CoolStream 120 series radiators have updated core for better performance.

Quality at EK level and an optimal price-performance ratio make these EK-CoolStream RAD XT radiators unique. The new radiators feature, besides their great design and high build quality, great cooling performance.
The copper fins are specially designed for Ultra-silent fans (with low Airflow). The parallel coolant channels reduce flow resistance to a minimum. On both sides of the radiator the M3 threads are integrated to allow fan installation on both sides and radiator mounting.

The radiator has integrated G1/4" threads, allowing installation of virtually all common fittings.

Please note: Over-tightening of the screws may damage the radiator. Always take care that the screws do not damage the radiator. Damages of the product because of improper use are not covered by the warranty!

Technical details:
Material:
- Copper fins
- Brass chambers
- Connection threads: G1/4"
- Pressure tested: 2bar
- Fin Density: 10-11 FPI
 

Enclosed:
1 x EK-CoolStream RAD XT
4 x M3 x 30mm screws for each FAN position
4 x M3 x 35mm screws for each FAN position

Important: The included screws may be too long for some applications. Always be sure to screw them in only so far that the radiator is not damaged.

EK Water Blocks

TOP PERFORMANCE WATER-COOLING SOLUTIONS We are expanding our network of resellers... We want only the best in our distribution channels. Are you up to the task?

Social Network

Site Map

Contact Info

Online Store