Trde cevi
Trde cevi
-
EK-HD Tube D.I.Y. Kit 10&12mm
S EK-HD Tube D.I.Y. Kitom 10mm lahko popolnoma prilagodite trde akrilne cevi Ø10 in Ø12 mm.
Podrobno22,99 $Na zalogi
-
EK-Loop Hard Tube 14mm 0.5m - Acrylic (2pcs)
EK-Loop Hard Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.
Podrobno12,49 $Na zalogi
-
EK-HD Tube Reamer
The EK-HD Tube Reamer is an external and internal tube reamer. The tool is used to deburr the remains of freshly cut tubing.
Podrobno14,49 $Na zalogi
-
EK-Loop Hard Tube 16mm 0.5m - Acrylic (2pcs)
EK-HD Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.
For expert users only!
Podrobno14,49 $Na zalogi
-
EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90° - Acrylic (6pcs)
EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/14mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
Podrobno74,99 $Na zalogi
-
EK-HD PETG Tube 12/16mm 1000mm (2pcs)
EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.
For expert users only!
Podrobno19,99 $Na zalogi
-
EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° - Acrylic (6pcs)
EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 12/16mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
Podrobno79,99 $Out of stock
-
EK-Loop Metal Tube Cutting Tool
Metal Tube Cutting Tool for PC water-cooling metal tubes Podrobno19,99 $Na zalogi
-
EK-Loop Heat Gun 2000W - EU Plug
This is a specialized tool for bending acrylic and PETG tubing but can be used in various other applications. It has two modes of operation, low (up to 250W) and high (up to 2000W). Podrobno54,99 $Na zalogi
-
EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs)
EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/12mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
Podrobno67,99 $Na zalogi