⚡ Seize Today's Limited Easter Offer! ⚡

Flash Deals Expire In: d h min sec
Shop Now
Delivery:

Fittings

Fittings

Fittings are used for connecting the tubes or pipes with other different components in the liquid cooling loop. There are numerous sizes and shapes, as well as differentiation between fittings for soft  and hard tubing. If you are confused, read our fittings and tubing guide!

per page

Items 21 to 30 of 33 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • EK-Quantum Torque Extender Rotary MF 14 - Satin Titanium

    EK-Quantum Torque Extender Static MF 14 is a premium male+female threaded extender. It is commonly used to extend a G1/4" port from a block, radiator or any other liquid-cooling component in order to ease the process of connecting to other components and having fewer bends or inaccessible fittings at tight places.

    Learn More
    $10.49

    In stock

  • EK-Quantum Torque Micro HDC 12 - Satin Titanium

    EK-Quantum Torque Micro HDC 12 is a premium 12mm fitting made for solid tubing, such as acrylic, PETG, and brass. A much smaller footprint will allow tube placement in places where a regular fitting would be too large or inconvenient. It was named Micro due to an installed height of only 11.5mm, which is 23% shorter than standard Torque HDC 12 fittings. The outer diameter of the fitting is also significantly smaller than its bigger brother, with only 16mm across the fitting.

    Learn More
    $9.99

    In stock

  • EK-Quantum Torque Rotary Offset 3 - Satin Titanium

    EK-Quantum Torque Rotary Offset 3 is a premium revolvable male+female threaded offset adapter fitting. It is commonly used to distance or offset G1/4" ports in tight spaces or to perfectly align hard tubing to another port in order to have aesthetically pleasant parallel tubing. Aesthetically, they are a perfect match with the EK-Quantum Torque series fittings and adapters.

    Learn More
    $13.49

    In stock

  • EK-Quantum Torque Extender Static MM 7 - Satin Titanium

    EK-Quantum Torque Extender Static MM 7 is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads.

    This is not a revolvable extender.

    Learn More
    $6.99

    In stock

  • EK-Quantum Torque HDC 12 - Satin Titanium

    EK-Quantum Torque HDC 12 fittings are EK's new minimalistic 12mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products. The aesthetic rings are sold separately.

    Torque series fittings are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!

    www.ekwb.com/quantum

    Learn More
    $9.49

    In stock

  • EK-Quantum Torque Micro Extender Static MF 7 - Satin Titanium

    EK-Quantum Torque Micro Extender Static MF 7 - Satin Titanium is a premium small-diameter male+female threaded extender. It is commonly used to extend a G1/4" port from a block, radiator, or any other liquid-cooling component in order to ease the process of connecting to other components and having fewer bends or inaccessible fittings at tight places. This extender is especially useful in situations where the port spacing is too low, or due to clearance issues.

    Learn More
    $6.49

    In stock

  • EK-Quantum Torque Micro HDP 12 - Satin Titanium

    EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings.

    The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. 

    Torque series fittings are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!

    www.ekwb.com/quantum

    Learn More
    $7.99

    In stock

  • EK-Quantum Torque Extender Static FF 14 - Satin Titanium

    EK-Quantum Torque Extender Static FF 14 is a premium male-threaded extender interconnect with female threads on both ends. It is used for connecting two water cooling components which both have male G1/4 threads.

    This is not a revolvable extender.

    Learn More
    $7.99

    In stock

  • EK-Quantum Torque Static FF 45° - Satin Titanium

    EK-Quantum Torque Static FF 45° is a 45° adapter fitting with two female G1/4" threads.

    Learn More
    $7.99

    In stock

  • EK-Quantum Torque Extender Static MM 28 - Satin Titanium

    EK-Quantum Torque Extender Static MM 28 is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads.

    This is not a revolvable extender.

    Learn More
    $9.49

    In stock

per page

Items 21 to 30 of 33 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4