Ice-Cold Deals are here! Get UP TO 50% OFF + a Special Gift for orders over $1500!   

Ends in: d h min sec
Shop & Save
Dostava:

Fitingi

Fitingi

Fittings are used for connecting the tubes or pipes with other different components in the liquid cooling loop. There are numerous sizes and shapes, as well as differentiation between fittings for soft  and hard tubing. If you are confused, read our fittings and tubing guide!

 

na stran

Izdelki 41 do 48 od skupno 48

Stran:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • EK-Quantum Torque Micro Extender Static MF 7 - Black Nickel

    EK-Quantum Torque Micro Extender Static MF 7 - Nickel is a premium small-diameter male+female threaded extender. It is commonly used to extend a G1/4" port from a block, radiator or any other liquid-cooling component in order to ease the process of connecting to other components and having fewer bends or inaccessible fittings at tight places. This extender is especially useful in situations where the port spacing is too low, or due to clearance issues.

    Podrobno

    3,99 $

    2,99 $ -25 %

    Na zalogi

  • EK-Quantum Torque Rotary Offset 3 - Black Nickel

    EK-Quantum Torque Rotary Offset 3 is a premium revolvable male+female threaded offset adapter fitting. It is commonly used to distance or offset G1/4" ports in tight spaces or to perfectly align hard tubing to another port in order to have aesthetically pleasant parallel tubing. Aesthetically, they are a perfect match with the EK-Quantum Torque series fittings and adapters.

    Podrobno

    10,49 $

    7,87 $ -25 %

    Na zalogi

  • EK-Classic HDC 14 - Black Nickel

    EK-Classic HDC 14 (Hard Tubing Compression) Fittings are 14mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a high-quality finish, the EK-Classic HDC Fittings are an aesthetically appealing and secure option for your custom loop liquid cooling system. A non-intrusive, minimalistic look, with NO added branding at all.

    EK® Classic - Efficient & Timeless

    This product is a part of the EK Classic Product Line that is characterized by minimalistic and clean design while maintaining class-leading performance. Less talk, more cooling!

    For more information, check out: www.ekwb.com/classic

    Podrobno

    5,99 $

    3,00 $ -50 %

    Na zalogi

  • EK-Quantum Torque Micro HDP 12 - Black Nickel

    EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings.

    The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. 

    Torque series fittings are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!

    www.ekwb.com/quantum

    Podrobno

    5,49 $

    4,12 $ -25 %

    Na zalogi

  • EK-Quantum Torque Micro Extender Static MM 7 - Black Nickel

    EK-Quantum Torque Micro Extender Static MM 7 - Black Nickel is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads. This extender is especially useful in situations where the port spacing is too low, or due to clearance issues.

    Podrobno

    3,99 $

    2,99 $ -25 %

    Na zalogi

  • EK-AF Y-Splitter Rotary 2F-1M G1/4 - Black Nickel

    EK-AF Y-Splitter Rotary 2F-1M je enostaven Y-razdelilec z dvema ženskima- in enim moškim G1/4" BSP navojem

    Podrobno

    10,49 $

    5,25 $ -50 %

    Na zalogi

  • EK-Classic HDC 12 - Black Nickel

    EK-Classic HDC 12 (Hard Tubing Compression) Fittings are 12mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a high-quality finish, the EK-Classic HDC Fittings are an aesthetically appealing and secure option for your custom loop liquid cooling system. A non-intrusive, minimalistic look, with NO added branding at all.

    EK® Classic - Efficient & Timeless

    This product is a part of the EK Classic Product Line that is characterized by minimalistic and clean design while maintaining class-leading performance. Less talk, more cooling!

    For more information, check out: www.ekwb.com/classic

    Podrobno

    5,99 $

    3,00 $ -50 %

    Na zalogi

  • EK-Quantum Torque Micro HDC 12 - Black Nickel

    EK-Quantum Torque Micro HDC 12 is a premium 12mm fitting made for solid tubing, such as acrylic, PETG, and brass. A much smaller footprint will allow tube placement in places where a regular fitting would be too large or inconvenient. It was named Micro due to an installed height of only 11.5mm, which is 23% shorter than standard Torque HDC 12 fittings. The outer diameter of the fitting is also significantly smaller than its bigger brother, with only 16mm across the fitting.

    Podrobno
    6,99 $

    Na zalogi

na stran

Izdelki 41 do 48 od skupno 48

Stran:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5