EK-XLC Predator 360 Push-Pull Add-On

EK-XLC Predator 360 Push-Pull Add-On is a set of three additional EK-Vardar F4-120ER fans for EK-XLC Predator 360 All-In-One to enable push-pull fan configuration.

EK-XLC Predator 360 has three EK-Vardar F4-120ER fans in the pull configuration. Consequently, the fans suck the air from the EK-CoolStream radiator. With this Add-On, you can install three additional EK-Vardar fans to your existing EK-XLC Predator 360 for the push configuration, thus creating a push-pull configuration on the radiator. This allows you to get the best possible cooling performance out of your EK-XLC Predator 360. You can expect up to 10% higher radiator performance, leading up to 3°C lower temperatures in a typical loop.

EK-Cable Y-Splitter 3-Fan is included for connecting the fans to EK-XLC Predator 360 fan splitter hub. We also include twelve M4x6 DIN7984 screws for mounting the fans and additional zip ties for neat cable management. Furthermore, the fans come with different cable lengths. This is because every fan is intended for a specific position on the Predator unit, so you will be able to really make it aesthetically pleasing. 

Enclosed:
- EK-Vardar F4-120ER (3 pcs)
- Mounting screws and 2,5mm Allen Key
- Zip ties (3 pcs)
- Installation manual

PLEASE NOTE:

DO NOT install the fans on top of the stock ones. That may lead to malfunctioning of the fans! With this Add-On the total height of the EK-XLC Predator 360 will be 95mm!