V košarici nimate nobenega izdelka.
Rezervni deli in orodja
Rezervni deli in orodja
Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
-
EK-Loop Stainless Steel Gauge Card
EK-Loop Stainless Steel Gauge Card is the essential precision tool for water cooling, featuring measurements for G1/4" threads, tubing sizes, nut sizes, screw lengths, and diameters for seamless assembly and compatibility. Podrobno9,99 $Na zalogi
-
EK-Loop Standoff M3.5/M2.5x2.5 (10pcs)
M3.5/M2.5x2.5 standoffs Podrobno7,99 $Na zalogi
-
EK-Loop Phillips Head Screw Set M4x30mm - Black (20pcs)
A set of twenty (20) spare 30mm long screws for EK-Quantum Surface S, P, and X series radiators.
Podrobno6,99 $Na zalogi
-
EK-Quantum Velocity UNC Standoffs - AM5 Nickel
These standoffs enable AM5 compatibility for your EK-Quantum Velocity AMD water blocks Podrobno6,49 $Na zalogi
-
EK-Quantum Velocity Ryzen Edition UNC Standoffs - AM5 Black
These standoffs enable AM5 compatibility for your EK-Quantum Velocity D-RGB - AMD Ryzen Edition water block Podrobno6,49 $Na zalogi
-
EK-Quantum Magnitude UNC Standoffs - AM5 Black
These standoffs enable AM5 compatibility for your EK-Quantum Magnitude AM4 water blocks. Podrobno6,49 $Na zalogi
-
EK-Quantum Magnitude UNC Standoffs - AM5 Nickel
These standoffs enable AM5 compatibility for your EK-Quantum Magnitude AM4 water blocks. Podrobno6,49 $Na zalogi
-
EK-Loop Hard Tube 12mm 0.5m - Acrylic (2pcs)
EK-HD Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.
For expert users only!
Podrobno9,99 $Na voljo za naročilo: This product is expected to become available on May 30, 2024 if you order it now
-
EK-Loop Soft Tube Cutting Tool
EK-Loop Soft Tube Cutter is a small handy tool specifically made for soft tube cutting. It is compatible with various flexible soft tubing types such as PVC, EPDM, Norprene, silicone, etc. The maximum size compatibility of the cutter is 16mm (5/8'') OD. This soft tube cutter makes a precise even cut allowing perfect fitment onto the fitting and superior aesthetics.
Podrobno6,49 $Na zalogi
-
EK-Loop D-RGB LED Strip - 180mm
Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 180mm long and can replace standard RGB strips in CPU blocks, monoblocks, and pumps. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.
Podrobno8,49 $Na zalogi
