STROMKABEL & ADAPTER
STROMKABEL & ADAPTER
-
EK-D-RGB 6-Way Splitter Cable
The EK-D-RGB 6-Way Splitter Cable allows users to connect up to six digitally addressable RGB products to a single D-RGB (addressable) motherboard or controller header so that they can synchronize all their D-RGB products.
Mehr erfahren10,49 $Verfügbar
-
EK-Loop Connect - Temperature Plug Sensor
EK-Loop Connect - Temperature Plug Sensor is an NTC (negative temperature coefficient) coolant temperature sensor. It allows users to get a precise coolant temperature measurement and to fine-tune the radiator fan speed for an optimal balance between acoustics and performance.
Mehr erfahren8,49 $Verfügbar
-
EK-Loop Connect - USB External Cable 1m
The EK-Loop Connect - USB External Cable 1m will allow the user to connect their EK-Loop Connect controller unit to the PC via a standard USB connector that can be found on the back of the motherboard. This type of connection is beneficial to modders because it allows them to pre-program the controller using another PC.
Mehr erfahren5,49 $
1,70 $ -69 %
Verfügbar
-
EK-Loop D-RGB Extension Cable (510mm)
The EK-RGB 4-Way Splitter Cable allows users to connect up to four RGB products to one RGB source so that they can build an aesthetically beautiful lighting system. It features standard 4-pin RGB headers and the male-male connector pins are also included in the packaging.
Mehr erfahren5,99 $Verfügbar
-
EK-Loop Adapter Molex to SATA
The EK-Loop Adapter Molex to SATA enables you to connect your 4-pin MOLEX products - like D5 and DDC pumps to a SATA power connector on your PSU.
Mehr erfahren5,99 $Verfügbar
-
EK-Loop D-RGB 2-Way Splitter Cable
The EK-Loop D-RGB Splitter Cable 2-Way allows users to connect up to two digitally addressable RGB products to a single D-RGB (addressable) motherboard or controller header so that they can synchronize all their D-RGB products.
Mehr erfahren7,49 $Verfügbar
-
EK-Loop D-RGB 3-Way Splitter Cable
EK-Loop D-RGB 3-Way Splitter Cable enables users to connect up to three Addressable D-RGB products to one Addressable D-RGB source header (Pinout: +5V, D, Blocked, Ground).
Mehr erfahren8,49 $Verfügbar
-
EK-Loop PCI-E 4.0 Riser Cable - 200mm
This is a Premium PCIe 4.0 x16 GPU Riser Cable. Works with both AMD RX6000 and NVIDIA 3000 series GPUs. Compatible with all motherboards, even ITX that require better signal integrity. Mehr erfahren75,99 $Verfügbar
-
EK-Loop OmniLink MF Extension - 100mm
Extend the reach of the OmniLink cable harness by 100mm Mehr erfahren5,99 $Verfügbar
-
EK-Loop OmniLink MF Extension - 500mm
Extend the reach of the OmniLink cable harness by 500mm Mehr erfahren7,99 $Verfügbar