EK-XRES 100 DDC MX 3.2 PWM (incl. pump)
Financing Available
Split the purchase amount of 500 EUR/AUD/USD or more in up to 3 interest-free monthly payments with Splitit.
Details
EK-XRES 100 DDC 3.2 PWM MX (incl. pump) is a reduced cost variant of EK-XRES 100 DDC 3.2 PWM (incl. pump) a High-Performance water cooling pump. It has been designed to lower the production costs yet still offer premium hydraulic performance at the best price.
The core of the unit is the market-proven EK-DDC 3.2 PWM water pump. This unit offers increased hydraulic performance (up to 15 %) compared to original factory top.
PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper quiet operation in idle mode!
EK-XRES DDC MX series reservoirs come preinstalled with anti-cyclone insert. Additionally, a PU anti-vortex foam is enclosed.
The main body features two G1/4 threaded ports of which one is an inlet (in the reservoir) and one is an outlet (from the pump). EK recommends the use of EK-ACF series compression fittings.
The tube is made of a quality acrylic material, while the rest of the pump/reservoir body is made from injection molded quality ABS material.
EK-XRES 100 DDC MX 3.2 PWM can also be upgraded with either:
- EK-UNI Pump Bracket (120mm fan) Vertical - For horizontal or vertical installation on any position with 120mm type fan hole pattern
- EK-UNI Pump Bracket (140mm fan) Vertical - For horizontal or vertical installation on any position with 140mm type fan hole pattern
- EK-UNI Pump Bracket (120mm fan) - For installation with only one orientation on any position with 120mm type fan hole pattern
- EK-UNI Pump Bracket (140mm fan) - For installation with only one orientation on any position with 140mm type fan hole pattern
This reservoir can be easily upgraded with longer acrylic tubes used by EK-RES X3 series reservoirs.
The top of this combo unit can be used as an inlet by adding the EK-RES X3 - Multiport TOP and an EK-RES X3 - Internal Tube with the corresponding length to your reservoir size. The Internal Tube is important to prevent the splashing sound of the coolant inside the reservoir and to prevent coolant foaming. It is recommended that the end of the internal inlet tube is submerged in coolant.
Technical data:
- Reservoir Diameter: 60mm
- Overal Height: 100mm (121mm incl. pump)
- Mounting hole pattern: 50x50mm
Enclosed:
- pump/reservoir combo unit (incl. pump)
- mounting material
- Allen key
- anti-vortex polyether black foam
- installation manual
Made in Slovenia - EU!
Pump made in Hungary - EU!
PLEASE NOTE:
- The DDC pump is water lubricated, in other words, it uses a wet rotor design. Therefore, it is strongly recommended not to run the pump dry.
- This product should NOT be installed with any aluminum Fluid Gaming parts!
- If no PWM signal is present, DDC pump runs at 100% RPM.
Additional Info
Threads | G1/4 |
---|