Enter Code 🌹 RIGROMANCE 🌹 at Checkout for Your Exclusive Valentine's Offer!

Deals Expire In: d h min sec
Shop Now

EK-Quantum Velocity² Direct Die D-RGB - 1700 Nickel + Plexi

Product EAN: 3831109897805

Available for order: This product is expected to become available on February 21, 2024 if you order it now

Estimated Delivery Date: 1 March 2024
  • DHL Economy tracking: 4 March 2024
  • DHL Express with tracking: 1 March 2024
  • UPS with tracking: 1 March 2024

Financing Available

Split the purchase amount of 500 EUR/AUD/USD or more in up to 3 interest-free monthly payments with Splitit.

2-Year Limited International Warranty

Fast & Free
Technical Support

Fast Delivery

PayPal & Credit Card
Payments Available

Paypal Buyer Protection

Made in the


EK-Quantum Velocity² Direct Die D-RGB - 1700 Nickel + Plexi is specifically designed for direct die cooling of the Intel® LGA 1700 socket-based CPUs of 12th, 13th and 14th generation Core architecture. It features a direct-die-exclusive cooling engine that is LGA 1700 socket-specific. It requires the removal of the IHS, the process popularly called Delidding. This CPU water block is EK-Matrix7 compliant and is mounted via a reinforced EK-Exact Mount system. 

EK-Quantum Velocity² Direct Die

Direct Die Cooling Engine

This water block carries significant differences when compared to the regular EK-Quantum Velocity² and is thus exclusive for direct die cooling. It will not work on CPUs that still have their IHS due to differences in Z-axis. The microfin stack is reduced in surface and focused toward the center where the CPU die is located. There is no Integrated Heat Spreader, so heat density will be significantly higher in this location. The base is thicker to further improve cooling and the ability to absorb heat and transfer it to the coolant. 

EK-Quantum Velocity² Direct Die

The microfins also go deeper into the coldplate, reaching even closer to the core. The jetplate has a geometry designed to focus on the center of the fin stack with a very high flow rate and even lower restriction than a regular jetplate. A highly compressible foam frame is also added to ensure your liquid metal application doesn't spread over to surface-mounted components on the CPU and cause a short. A secondary purpose is that it also protects the ILM replacement frame made of anodized aluminum. The ILM frame is insulated toward the motherboard to prevent any shorts. The Thermal Grizzly Conductonaut is included in the package. 

Foam insert for direct die liquid metal

The Velocity² series water blocks cover the entirety of the socket while conforming to Intel guidelines about safe zones. 

Water Block Material and Manufacturing

The coldplate is manufactured out of the highest grade 99.99%-pure electrolytic copper, machined with precision for the best possible contact and heat transfer which is further nickel-plated.  This version of the water block features a nickel-plated coldplate with a CNC-machined cast Acrylic top piece. 

EK-Quantum Velocity² Direct Die


The EK-Quantum Velocity² is an EK-Matrix7 compatible product. The EK-Matrix7 is a product raster that is bound to set a new standard. EK is adding a new dimension to PC liquid cooling, where the height of products and the distance between ports are managed by increments of 7mm. This improves product alignment and reduces the time spent planning the loop and bending tubes. Through the meticulous planning of our products, building a liquid-cooled PC becomes easy and fun, just like toy bricks.

EK-Quantum Velocity² Direct Die Mounting

This water block uses a reinforced EK-Exact Mount to account for the ILM replacement frame. This modified version is twice as thick as the regular one. The backplate is insulated via both anodization and a polycarbonate sheet from the motherboard components.   

EK-Quantum Velocity² Direct Die

It's screwed in from the back, allowing for seamless and clean front aesthetics without any screws disrupting the harmony of shape. The system uses pre-tensioned springs concealed in the water block top, so the installation is finished and the exact mounting pressure is achieved with only a few turns of the thumb nuts. 

EK-Quantum Velocity² ILM Replacement - 1700

This contact frame replaces the motherboard's integrated loading mechanism (ILM) with a frame that bolsters the structural rigidity of the socket, motherboard, and even the CPU. It prevents warping or bending of the CPU and the surrounding area, improving cooling efficiency due to more even pressure applied on the CPU. This ILM replacement also acts as a die guard, not allowing too much pressure to crush the CPU die. To prevent any unwanted electrical conductivity, it is insulated from the motherboard.  

EK-Quantum Velocity² Direct Die

EK-Quantum Velocity² Direct Die D-RGB LED Lighting

This product is compatible with all popular addressable RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB header. 14 addressable RGB LEDs are hidden under the stick-out piece, which acts as a diffuser.

Winning Prestigious Awards at Great Velocity

We shouldn’t forget to mention that our Velocity² products have taken home five prestigious awards so far. Their performance, innovative design, and bold approach to creating water-cooling solutions ensured this product line gets the recognition it deserves. The awards given to Velocity² products include iF Design, European Hardware Awards, CES 22, and others.

Technical specifications:
- D-RGB cable length: 50cm
- D-RGB connector 3-pin 5V digital LED header (Pinout: +5V | Digital | Blocked | Ground)

CPU socket compatibility:
- Intel LGA 1700 with a delidded CPU

- EK-Quantum Velocity² Direct Die CPU water block
- Exact Mount Direct Die CPU mounting mechanism with ILM replacement
- Backplate
- Foam inserts
- Jetplate for LGA 1700 Direct Die
- Thermal Grizzly Conductonaut liquid metal

Made in Slovenia - Europe!


  • It is mandatory to follow the user manual step-by-step. Not doing so can result in fatal damage to your processor.

  • Delidding the CPU voids its Intel warranty.

  • Delidding entails a very risky modification of the CPU and may, even when adequately performed, result in damage to the processing unit.

  • EKWB will not assume any responsibility or liability for damages to the CPU inflicted during or as a consequence of delidding. All liability for damages to the CPU is disclaimed. You do it at your own risk.


  • This product should NOT be installed with any aluminum EK Fluid Gaming parts!
  • The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel plated water block! EK is offering a selection of such products in the coolants section.
  • The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB(A-RGB) header.
  • Delidding is intended to be undertaken by an adequately trained and experienced professional.

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Sockets LGA 1700

Decided to buy this product?


Available for order: This product is expected to become available on February 21, 2024 if you order it now

You may also be interested in the following product(s)