Time remaining:

d h min sec

CYBER MONDAY

Delivery:
-10 % EK-Quantum Vector RX 6700XT D-RGB - Nickel + Plexi

EK-Quantum Vector RX 6700XT D-RGB - Nickel + Plexi

Product EAN: 3831109847992

Pre-Order: This product is expected to ship out in mid December 2021.

Pre-Order

$173.99

$156.59 -10 %

Estimated Delivery Date: 30 December 2021
?
  • DHL Economy tracking: 31 December 2021
  • DHL Express with tracking: 30 December 2021
  • UPS with tracking: 30 December 2021

Financing Available

Split the purchase amount of 500 EUR/AUD/USD or more in up to 3 interest-free monthly payments with Splitit.

2-Year Limited International Warranty

Fast & Free
Technical Support

DHL & UPS
Fast Delivery

PayPal & Credit Card
Payments Available

Paypal Buyer Protection

Made in the
EU

Frequently Bought Together

+

+

+

=
Full Price
$246.55

Details

EK-Quantum Vector RX 6700XT is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for graphics cards based on the latest AMD® RDNA2™ architecture. This water block fits most reference PCB designs of the Radeon RX 6700XT GPUs.  For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.

EK water block for Radeon RX 6700XT GPU

EK-Quantum Vector RX 6700XT water block for reference AMD Radeon RX 6700 XT GPUs

EK-Quantum Vector RX 6700 water block is compatible with most reference design Radeon RX 6700 graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. 

These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. 

EK water block for Radeon RX 6700XT GPU

The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.

D-RGB lighting on EK-Quantum Vector RX 6700XT D-RGB water block

The aesthetic end-piece is housing the addressable D-RGB LED strip. This water block is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. 

Backplate for the 6700 water block

EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections.

Enclosed:

- EK-Quantum Vector RX 6700  series high-performance water block
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts, and washers
- 2x Nickel plated brass plug G1/4”
- EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
- Thermal pads
Thermal grease EK-TIM Ectotherm (1g)

Technical Specification:

- Dimensions: (LxHxW) - 260.5 x 130.5 x 16.5
- D-RGB cable length: 500mm
- D-RGB LED count: 8
- D-RGB connector: standard 3-pin (+5V, Data, Blocked, Ground)

Made in Slovenia - Europe!

PLEASE NOTE:

  • This block is made for reference PCB RX 6700 XT cards.
  • Due to the immense variety of fittings/barbs availablae on the market, we guarantee compatibility only with EK fittings.
  • Factory backplates are not compatible with this water block!
  • Check your toolbox if you are missing this special Hex adapter for some of the screws.
  • This product should NOT be installed with any aluminum Fluid Gaming parts!

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Chip Manufacturer AMD Radeon

Decided to buy this product?

Pre-Order

$173.99

$156.59 -10 %

Pre-Order: This product is expected to ship out in mid December 2021.

You may also be interested in the following product(s)

EK-CoolStream PE 240 (Dual)

EK-CoolStream PE 240 (Dual)

$77.99

$70.19 -10 %

EK-CoolStream SE 240 (Slim Dual)

EK-CoolStream SE 240 (Slim Dual)

$69.99

$62.99 -10 %