Delivery:
-65 % EK-Quantum Vector FTW3 RTX 2080 D-RGB - Nickel + Acetal

EK-Quantum Vector FTW3 RTX 2080 D-RGB - Nickel + Acetal

Product EAN: 3831109816790

Out of stock. Expected date of availability is December 6, 2024

$167.99

$58.80 -65 %

Financing Available

Split the purchase amount of 500 EUR/AUD/USD or more in up to 3 interest-free monthly payments with Splitit.

2-Year Limited International Warranty

Fast & Free
Technical Support

DHL & UPS
Fast Delivery

PayPal & Credit Card
Payments Available

Paypal Buyer Protection

Made in the
EU

Details

The EK-Quantum Vector FTW3 RTX 2080 D-RGB high-performance water block is an evolution of the EK-Vector FTW3 RTX that was specially designed for the EVGA® FTW3 version of NVIDIA® GeForce® RTX 2080 graphics cards. These water blocks use the signature EK single slot slim look and cover the entire PCB length. This sophisticated cooling solution will transform your powerful EVGA graphics card into a minimalistic, elegant piece of hardware with accented D-RGB (addressable) LED lighting. The block also features a unique aesthetic cover over the block Terminal which is designed to showcase the graphics card model via addressable D-RGB LEDs, visible from the side.

This water block is compatible with all EVGA FTW3 GeForce RTX 2080 graphics cards, but as always, we recommend that you refer to the EK® Cooling Configurator for a precise compatibility match. 

EK-Quantum Vector FTW3

The water block directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance of these water blocks. 

The EK Quantum Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios. 

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality black POM acetal. Sealing is ensured by high-quality EPDM O-rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. It features three integrated LED sources, two located in the terminal cover and one LED strip on each end of the water block.

The block is already equipped with three 5V D-RGB addressable LED strips that are compatible with the motherboard 3-pin 12V D-RGB (addressable) LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

RGB compatibility 

EK® recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section.

G1/4" threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of EK-Scalar GPU Terminals. The EK-Quantum Vector RTX FTW 3 GPU water block terminal covers are not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.

Both the NVIDIA® and EVGA NVLink™ are compatible with this water block. 

Enclosed:

- EK-Quantum Vector FTW3 series high-performance water block
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts, and washers
- 2x Nickel plated brass plug G1/4”
- 6mm Allen key
- Thermal pads
- Thermal grease EK-TIM Ectotherm (1g)

Made in Slovenia - Europe!

PLEASE NOTE:

  • Due to an immense variety of fittings/barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • EVGA FTW3  2080 factory backplate is not compatible with this water block!
  • Check your toolbox if you are missing this special Hex adapter for some of the screws.
  • Fittings are just for showcase and are not included!
  • This product should NOT be installed with any aluminum Fluid Gaming parts!
  • The use of specifically engineered coolants that contain corrosion, scale, and biological inhibitors is mandatory to prevent damage to your nickel plated water block! EK is offering a selection of such products in the coolants section.

Additional Info

Material / Design / Color option Nickel Acetal
Threads G1/4
Chip Manufacturer Nvidia GeForce

Decided to buy this product?

$167.99

$58.80 -65 %

Out of stock. Expected date of availability is December 6, 2024

You may also be interested in the following product(s)