EK-Loop D5 G3 PWM Motor is a genuine high-performance D5 water pump with PWM speed control via the motherboard or a dedicated fan/pump controller. Compared to the previous generation G2, the G3 comes with elegant black cables and a SATA power connector.

EK-UNI Pump Bracket (120mm FAN) Vertical is a horizontal and vertical mounting adapter for water cooling pump and pump-reservoir combo unit installation. The bracket can be mounted to any 120mm fan hole pattern (105mm square hole distance layout) using the enclosed M4 nuts and bolts. The bracket is made of high-quality press-bent 1,5mm thick steel painted in black.

EK-Loop UNI Pump Reservoir Bracket - 120mm is a mounting adapter for installation of EK D5, DDC and VTX pumps and pump-reservoir combo units to any 120mm fan hole. Additionally, it can be used with EK-RES X3 Holder 60mm (2pcs) to mount any reservoir or pump-reservoir combo with a tube of 60mm in diameter.

Laing DDC-3.2 high-performance water pump with power management control (via PWM - pulse width modulation) of rotation speed trough motherboard BIOS or dedicated fan controller.

EK-XTOP Revo D5 RGB PWM is a high-performance liquid cooling pump. This unit offers increased hydraulic performance (up to 15 %) compared to original factory top. This pump unit has black sleeved cables and a pre-installed 4-pin 12V RGB LED strip. 

This unit has black sleeved cables.

EK-XTOP Revo Dual D5 PWM Serial is a fourth generation high-performance aftermarket DUAL pump top (volute) for D5 type water pumps, pre-installed with two EK-D5 PWM water pumps.

EK-UNI Pump Bracket (140mm FAN) Vertical is a horizontal and vertical mounting adapter for pump and combo unit installation. The bracket can be mounted to any 140mm fan hole (120mm hole distance square) pattern using the enclosed M4 nuts and bolts. 

EK-Loop UNI Pump Reservoir Bracket - 140mm is a mounting adapter for installation of EK D5, DDC, and VTX pumps and pump-reservoir combo units to any 120mm fan mounting hole pattern (125mm hole spacing). Additionally, it can be used with EK-RES X3 Holder 60mm (2pcs) to mount any reservoir or pump-reservoir combo with a tube of 60mm in diameter.