Delivery:
-5 % EK-AC GeForce RTX 3080/3090 D-RGB

EK-AC GeForce RTX 3080/3090 D-RGB

Product EAN: 3831109833698

In stock!

$99.99

$94.99 -5 %

This product is Aluminum-based. It cannot be used with components made of other metals.

Financing Available

Split the purchase amount of 500 EUR/AUD/USD or more in up to 3 interest-free monthly payments with Splitit.

2-Year Limited International Warranty

Fast & Free
Technical Support

DHL & UPS
Fast delivery

PayPal & Credit Card
Payments Available

Paypal Buyer Protection

Made in the
EU

Details

EK-AC GeForce RTX 3080/3090 is the newest aluminum Fluid Gaming GPU water block. It is made for graphics cards based on the latest NVIDIA® Ampere™ architecture. This extended compatibility water block fits even more reference PCB designs.  For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.

EK-AC GeForce RTX 3080/3090 water block for reference GeForce RTX 3080 and 3090 GPUs

EK-AC GeForce RTX 3080/3090 D-RGB water block is compatible with most reference design (not Founders Edition) GeForce RTX 3080 and 3090 graphics cards. It is purpose-designed with a much thicker aluminum base to clear the tall capacitors on most reference design graphics cards. This gives the water block the advantage of having a wider compatibility list, without sacrificing any coolant flow restriction. It is also compatible with Zotac® Trinity GPUs which use a modified, longer reference PCB.

Aluminum Fluid gaming water block for nvidia 3080 and 3090 reference pcb

This full cover aluminum water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages and chokes to maximize cooling and minimize the chances of coil whine. 

This newly developed water block features optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. Additionally, this new design allows the terminal to be screwed directly onto the aluminum cold plate of the GPU block, making it more rigid and reducing the chances of damaging the water block. 

This Fluid Gaming water block uses an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. 

Fin array is populated by 26 microfins with wide microchannels that provide optimal cooling performance, without unnecessary flow restrictions or clogging hazards. 

The base of the block is CNC-machined out aluminum, while its top is CNC-machined out of glass-like cast Acrylic. These full cover Fluid Gaming water blocks also feature durable acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while aluminum standoffs are already pre-installed and allow for a safe and easy installation procedure.

D-RGB lighting on EK-AC GeForce RTX 3080/3090D-RGB water block

The addressable D-RGB LED strip is located along the side of the block underneath a removable Elox black shroud. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. 

Backplate for the 3080/3090 water block

EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling on the 3090 GPUs for the GPU core, VRAM, and backside of the printed circuit board VRM section.

Enclosed:

- EK-AC GeForce RTX 3080/3090 D-RGB series aluminum water block
- Mounting mechanism with screw-in aluminum standoffs
- Necessary mounting screws, nuts, and washers
- 2x Acetal plug G1/4”
- EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
- Thermal pads
Thermal grease EK-TIM Ectotherm (1g)

Technical Specification:

- Dimensions: (LxHxW) - 234x122.5x18.7mm
- D-RGB cable length: 500mm
- D-RGB LED count: 8
D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

Made in Slovenia - Europe!

PLEASE NOTE:

  • EK-AC GeForce RTX water block is not a standalone product.  Its purpose is solely for use with EK Fluid Gaming products!
  • For connecting multiple EK Fluid Gaming water blocks you will require the EK-AC SLI Connector Kit.

Additional Info

Threads G1/4
Chip Manufacturer Nvidia GeForce

Decided to buy this product?

$99.99

$94.99 -5 %

In stock!