V košarici nimate nobenega izdelka.
Rezervni deli in orodja
Rezervni deli in orodja
Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
-
EK-Loop Hex Key Screw Set M4x8mm - Black (20pcs)
A set of 20 M4 screws of 8mm length. Podrobno5,49 $Na zalogi
-
EK-Loop Leak Tester Flex
The EK-Loop Leak Tester Flex is a fast and safe way of testing for possible leaks in your liquid cooling loop. While traditional leak testing works, it requires hours before very small leaks are detected and then things can become messy. The EK-Loop Leak Tester Flex does the job within minutes.
Podrobno32,99 $Na zalogi
-
EK-Loop Metal Tube Cutting Tool
Metal Tube Cutting Tool for PC water-cooling metal tubes Podrobno19,99 $Na zalogi
-
EK-Loop Modulus Hard Tube Bending Tool - 12mm
EK-Loop Modulus Hard Tube Bending Tool - 12mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 12mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.
These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.
Podrobno34,99 $Out of stock. Expected date of availability is May 24, 2024
-
EK-Loop Modulus Hard Tube Bending Tool - 14mm
EK-Loop Modulus Hard Tube Bending Tool - 14mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 14mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.
These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.
Podrobno34,99 $Na zalogi
-
EK-Loop Modulus Hard Tube Bending Tool - 16mm
EK-Loop Modulus Hard Tube Bending Tool - 16mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 16mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.
These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.
Podrobno34,99 $Na zalogi
-
EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
The EK-Loop Multi Allen Key is a multi-purpose tool that replaces the standard 6mm, 8mm, and 9mm Allen key, while it can also be used to operate acetal plugs (with the line style groove). The key does not only replace all of the crucial Allen key formats used for building a liquid-cooled PC but also helps protect your liquid cooling gear.
Podrobno2,99 $Na zalogi
-
EK-Loop Nut Set M4 - Black (20pcs)
A set of twenty (20) M4 nuts.
Podrobno3,49 $Na zalogi
-
EK-Loop Phillips Head Screw Set M4x10mm - Black (20pcs)
A set of twenty (20) spare 10mm long screws for EK-Quantum Surface S, P, and X series radiators.
Podrobno5,49 $Na zalogi
-
EK-Loop Phillips Head Screw Set M4x30mm - Black (20pcs)
A set of twenty (20) spare 30mm long screws for EK-Quantum Surface S, P, and X series radiators.
Podrobno6,99 $Out of stock
