Black Friday: UP TO 80% OFF + GIFT! Let’s liquid-cool the world! SHOP SMART- Save BIG   

Ends in: d h min sec
Shop Now
Delivery:

Spare parts & Tools

Spare parts & Tools

Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
per page

Items 1 to 10 of 11 total

Page:
  1. 1
  2. 2
  • EK-RES X3 - TOP

    The EK-RES X3 TOP is an replacement top end cap for EK-RES X3 series reservoirs and other RES X3 based parts.

    Learn More

    $9.49

    $8.54 -10 %

    In stock

  • EK-RES X3 - TOP WHITE

    The EK-RES X3 TOP WHITE is an replacement white top end cap for EK-RES X3 series reservoirs and other RES X3 based parts.

    Learn More

    $9.49

    $8.54 -10 %

    In stock

  • EK-RES X3 Holder 60mm WHITE(2pcs)

    Spare WHITE Reservoir Holder for cylindrical reservoirs 60mm in diameter.

    Learn More

    $8.49

    $7.64 -10 %

    In stock

  • EK-UNI Holder DDC Spider (140mm FAN)

    EK-UNI Holder DDC Spider (140mm FAN) is a mounting adapter plate for attaching any Xylem DDC powered EK-XRES and -XTOP series water pumps to a standard 140mm fan mounting hole pattern in your computer chassis.

    Learn More

    $9.49

    $8.54 -10 %

    In stock

  • Filling Bottle (1000mL)

    A handy 1L filling bottle designed to make your loop filling process much easier. Very convenient for mixing the EK-CryoFuel concentrates with distilled water. The telescopic tube of the filling bottle can reach even the most remote and crammed fill ports. The squeeze bottle can also be used to suck the coolant out of your reservoir making system draining an easy task as well. Just squeeze the bottle, insert the tube into the coolant and let the vacuum take care of the rest.

    Learn More

    $8.49

    $7.64 -10 %

    In stock

  • EK-Revo D5 Pump Mount

    The EK-Revo D5 pump mount is compatible with every D5 pump on the market (60mm diameter). It offers maximum flexibility allowing installation at any angle within 360° of rotation.

     

    Learn More

    $9.99

    $8.99 -10 %

    In stock

  • EK-HD Tube Reamer

    The EK-HD Tube Reamer is an external and internal tube reamer. The tool is used to deburr the remains of freshly cut tubing.

    Learn More

    $12.49

    $7.49 -40 %

    In stock

  • EK-FC Terminal Cover

    The special plastic cover over the block Terminal. This add-on is designed to reveal the graphics card model, visible from the side.

    Learn More

    $17.99

    $9.00 -50 %

    In stock

  • EK-Loop D-RGB LED Strip - 400mm

    Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 400mm long and can replace standard RGB strips in CPU blocks, monoblocks, reservoirs, and pump-combos. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.

    Technical data:

    Learn More

    $10.49

    $9.44 -10 %

    In stock

  • EK-Loop Hard Tube 12mm 0.5m - Acrylic (2pcs)

    EK-HD Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.

    For expert users only!

    Learn More

    $9.49

    $8.54 -10 %

    In stock

per page

Items 1 to 10 of 11 total

Page:
  1. 1
  2. 2