V košarici nimate nobenega izdelka.
Rezervni deli in orodja
Rezervni deli in orodja
Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
-
EK-Revo D5 Pump Mount
The EK-Revo D5 pump mount is compatible with every D5 pump on the market (60mm diameter). It offers maximum flexibility allowing installation at any angle within 360° of rotation.
Podrobno10,99 $Na zalogi
-
EK-Loop Heat Gun 1500W - US Plug
This is a specialized tool for bending acrylic and PETG tubing but can be used in various other applications. It has two modes of operation, low (up to 250W) and high (up to 1500W). Podrobno54,99 $Na zalogi
-
EK-Quantum Velocity D-RGB Mounting Plate - AMD Black
An addressable D-RGB upgrade kit for existing EK-Velocity high-performance CPU water blocks for AMD AM4 CPU sockets. The upgrade kit includes the AMD AM4 socket compatible steel mounting plate and pre-installed 3-pin 5V D-RGB LEDs.
Podrobno20,99 $Only 2 pieces left
-
EK-RES X3 - TUBE 110 (64mm)
Nadomestna cev za EK-RES X3 rezervoar.
Podrobno14,49 $Na zalogi
-
EK-RES X3 - TUBE 150 (104mm)
Nadomestna cev za EK-RES X3 rezervoar.
Podrobno17,99 $Na zalogi
-
EK-Quantum Vector Mounting Screw Set - Type F
EK GPU water block mounting screw set - Type F Podrobno12,99 $
5,07 $ -61 %
Na zalogi
-
EK-Quantum Surface End Tank Plug - Nickel
Nickel-plated G1/4" end tank plug Podrobno2,49 $Na zalogi
-
EK-Supremacy EVO Backplate
Set hrbtnih plošč za EK-Supremacy EVO vodne bloke.
Podrobno8,49 $Na zalogi
-
EK-Loop D-RGB LED Strip - 180mm
Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 180mm long and can replace standard RGB strips in CPU blocks, monoblocks, and pumps. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.
Podrobno8,49 $Na zalogi
-
EK-HDC Fitting 12mm O-Ring (6pcs)
Replacement O-ring gaskets for EK-HDC 12mm fittings
Podrobno3,99 $Na zalogi
