Sie haben keine Artikel im Warenkorb.
ERSATZTEILE & WERKZEUGE
ERSATZTEILE & WERKZEUGE
Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
-
EK-Loop Hex Key Screw Set M4x8mm - Black (20pcs)
A set of 20 M4 screws of 8mm length. Mehr erfahren5,49 $Verfügbar
-
EK-Loop Phillips Head Screw Set M4x10mm - Black (20pcs)
A set of twenty (20) spare 10mm long screws for EK-Quantum Surface S, P, and X series radiators.
Mehr erfahren5,49 $Verfügbar
-
EK-Loop Foldable Filling Bottle
A handy 1L filling bottle designed to make your loop filling process much easier. Very convenient for mixing the EK-CryoFuel concentrates with distilled water. The telescopic tube of the filling bottle can reach even the most remote and crammed fill ports. The squeeze bottle can also be used to suck the coolant out of your reservoir making system draining an easy task as well. Just squeeze the bottle, insert the tube into the coolant and let the vacuum take care of the rest.
Mehr erfahren5,93 $Verfügbar
-
Screwdriver UNIOR 621 CR TX 6x60
High quality screwdriver with TX profile - TX 6.
Mehr erfahren5,88 $Only 1 piece left
