V košarici nimate nobenega izdelka.
Rezervni deli in orodja
Rezervni deli in orodja
Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
-
EK-Loop D-RGB LED Strip - 400mm
Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 400mm long and can replace standard RGB strips in CPU blocks, monoblocks, reservoirs, and pump-combos. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.
Technical data:
Podrobno11,49 $Na zalogi
-
EK-Loop Standoff M4/M2.5x2.5 (15pcs)
M4/M2.5x2.5 standoffs Podrobno10,99 $Na zalogi
-
Thermal Grizzly TG Shield
This compound is used to protect the SMDs (surface-mounted devices) around the chips from possible liquid metal spillage if used in excessive amounts. Podrobno14,99 $Na zalogi
