V košarici nimate nobenega izdelka.
Trde cevi
Trde cevi
Using a hard or solid tubing is an advanced technique of connecting the various components or water blocks. Bring out your craftsmanship and make a liquid cooling masterpiece!
-
EK-Loop Metal Tube 12mm 0.5m - Nickel (2pcs)
Premium quality metal tubing with 12mm OD. 2x 500mm long Podrobno27,99 $Only 5 pieces left
-
EK-HD PETG Insert 10/12mm (10pcs)
The EK-HD PETG Inserts are EK's way of battling against potential deformation hazards that the use of PETG tubes present.
Podrobno6,99 $Na zalogi
-
EK-Loop Heat Gun 1500W - US Plug
This is a specialized tool for bending acrylic and PETG tubing but can be used in various other applications. It has two modes of operation, low (up to 250W) and high (up to 1500W). Podrobno54,99 $Na zalogi
-
EK-HD PETG Tube 10/12mm 1000mm (2pcs)
EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.
For expert users only!
Podrobno13,99 $Na zalogi
-
EK-Loop Bending Cord for 10mm ID Hard Tube - 0.33m
This is a silicone insert for bending acrylic, PETG, or other types of hard tubing used in the PC water-cooling. Podrobno5,99 $Na zalogi
-
EK-HD PETG Tube 10/12mm 500mm (2pcs)
Trda cev iz PETG, namenjena povezavi komponent v kombinaciji s priključki za cevi EK-HD Adapter in EK-HDC Fitting.
Podrobno6,99 $Na zalogi
-
EK-Loop Bending Cord for 12mm ID Hard Tube - 0.33m
This is a silicone insert for bending acrylic, PETG, or other types of hard tubing used in the PC water-cooling. Podrobno5,99 $Na zalogi
-
EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs)
EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/12mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
Podrobno67,99 $Na zalogi
-
EK-Loop Heat Gun 2000W - EU Plug
This is a specialized tool for bending acrylic and PETG tubing but can be used in various other applications. It has two modes of operation, low (up to 250W) and high (up to 2000W). Podrobno54,99 $Na zalogi
-
EK-HD PETG Insert 12/16mm (10pcs)
The EK-HD PETG Inserts are EK's way of battling against potential deformation hazards that the use of PETG tubes present.
Podrobno6,99 $Na zalogi
