Lieferung:

KONTROLLER

KONTROLLER

pro Seite

  • EK-Loop Connect - Temperature Plug Sensor

    EK-Loop Connect - Temperature Plug Sensor is an NTC (negative temperature coefficient) coolant temperature sensor. It allows users to get a precise coolant temperature measurement and to fine-tune the radiator fan speed for an optimal balance between acoustics and performance.

    Mehr erfahren
    7,49 $

    Verfügbar

  • EK-Loop Connect - Flow Meter

    This minimalistic flow meter allows users to precisely monitor the flow rate in their loop and fine-tune the pump speed for optimal balance between acoustics and performance. It also sends a report if the pump is not operational, thus preventing overheating of the system and possible malfunctions.

    Mehr erfahren
    34,99 $

    Verfügbar

  • EK-Loop Connect Level Sensor TBE 60

    A coolant level sensor provides a warning when the reservoir reaches a point where it would be prudent to top it off. Due to the coolant evaporation through the tubing, it makes sure the pump never runs dry. Also, in case of a leak, it warns you of the coolant level being below its optimal value.

    Mehr erfahren
    20,99 $

    Verfügbar

  • EK-Loop Connect - USB External Cable 1m

    The EK-Loop Connect - USB External Cable 1m will allow the user to connect their EK-Loop Connect controller unit to the PC via a standard USB connector that can be found on the back of the motherboard. This type of connection is beneficial to modders because it allows them to pre-program the controller using another PC.

    Mehr erfahren
    5,49 $

    Verfügbar

pro Seite