Sie haben keine Artikel im Warenkorb.
Verbindungsstücke
Verbindungsstücke
Fittings are used for connecting the tubes or pipes with other different components in the liquid cooling loop. There are numerous sizes and shapes, as well as differentiation between fittings for soft and hard tubing. If you are confused, read our fittings and tubing guide!
-
EK-PLUG G1/4
EK G1/4 plug with o-ring. To tighten the plug you will need 6mm allen key.
Mehr erfahren2,49 $Verfügbar
-
EK-12mm (1/2") SHORT G1/4 High-Flow Fitting
EK HIgh flow SHORT Fitting with o-ring for 12mm (1/2") ID tubing
Mehr erfahren0,99 $Out of stock
-
EK-Quantum Torque Micro Extender Static MF 7 - Black
EK-Quantum Torque Micro Extender Static MF 7 - Black is a premium small-diameter male+female threaded extender. It is commonly used to extend a G1/4" port from a block, radiator, or any other liquid-cooling component in order to ease the process of connecting to other components and having fewer bends or inaccessible fittings at tight places. This extender is especially useful in situations where the port spacing is too low, or due to clearance issues.
Mehr erfahren -
EK-Quantum Torque Surface Port Adapter - Nickel
Adapter for utilizing additional EK-Quantum Surface radiator ports Mehr erfahren3,49 $Verfügbar
-
EK-Quantum Torque Micro Extender Static MM 7 - Black Nickel
EK-Quantum Torque Micro Extender Static MM 7 - Black Nickel is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads. This extender is especially useful in situations where the port spacing is too low, or due to clearance issues.
Mehr erfahren3,99 $
1,92 $ -52 %
Verfügbar
-
EK-Quantum Torque Micro HDC 12 - Satin Titanium
EK-Quantum Torque Micro HDC 12 is a premium 12mm fitting made for solid tubing, such as acrylic, PETG, and brass. A much smaller footprint will allow tube placement in places where a regular fitting would be too large or inconvenient. It was named Micro due to an installed height of only 11.5mm, which is 23% shorter than standard Torque HDC 12 fittings. The outer diameter of the fitting is also significantly smaller than its bigger brother, with only 16mm across the fitting.
Mehr erfahren
