⚡ Seize Today's Limited Easter Offer! ⚡

Flash Deals Expire In: d h min sec
Shop Now
Dostava:

Fitingi

Fitingi

Fittings are used for connecting the tubes or pipes with other different components in the liquid cooling loop. There are numerous sizes and shapes, as well as differentiation between fittings for soft  and hard tubing. If you are confused, read our fittings and tubing guide!

na stran

Izdelki 41 do 50 od skupno 53

Stran:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6
  • EK-Quantum Torque Compression Ring 6-Pack STC 16 - Nickel

    EK-Quantum Torque Compression Ring 6-Pack STC 16 - Nickel is a premium locking ring made for the EK-Quantum Torque STC 10/16 and 12/16 series fittings. It is not a stand-alone product, requiring an existing Torque fitting's barb.

    Podrobno
    37,99 $

    Out of stock

  • EK-Quantum Torque Compression Ring 6-Pack HDC 16 - Nickel

    EK-Quantum Torque Compression Ring 6-Pack HDC 16 - Nickel is a premium locking ring made for the EK-Quantum Torque HDC 16 series fittings. It is not a stand-alone product, requiring an existing Torque fitting's barb.

    Podrobno
    37,99 $

    Out of stock

  • EK-Quantum Torque Micro HDP 12 - Nickel

    EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings.

    The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. 

    Torque series fittings are part of the EK Quantum Product Line that emphasizes minimalistic, elegant design, and performance. For those who want to stand out!

    www.ekwb.com/quantum

    Podrobno
    5,99 $

    Na zalogi

  • EK-Quantum Torque Rotary Offset 3 - Nickel

    EK-Quantum Torque Rotary Offset 3 is a premium revolvable male+female threaded offset adapter fitting. It is commonly used to distance or offset G1/4" ports in tight spaces or to perfectly align hard tubing to another port in order to have aesthetically pleasant parallel tubing. Aesthetically, they are a perfect match with the EK-Quantum Torque series fittings and adapters.

    Podrobno
    11,49 $

    Na zalogi

  • EK-Quantum Torque Micro HDC 12 - Nickel

    EK-Quantum Torque Micro HDC 12 is a premium 12mm fitting made for solid tubing, such as acrylic, PETG, and brass. A much smaller footprint will allow tube placement in places where a regular fitting would be too large or inconvenient. It was named Micro due to an installed height of only 11.5mm, which is 23% shorter than standard Torque HDC 12 fittings. The outer diameter of the fitting is also significantly smaller than its bigger brother, with only 16mm across the fitting.

    Podrobno
    7,49 $

    Na zalogi

  • EK-Quantum Torque Micro Extender Static MF 7 - Nickel

    EK-Quantum Torque Micro Extender Static MF 7 - Nickel is a premium small-diameter male+female threaded extender. It is commonly used to extend a G1/4" port from a block, radiator or any other liquid-cooling component in order to ease the process of connecting to other components and having fewer bends or inaccessible fittings at tight places. This extender is especially useful in situations where the port spacing is too low, or due to clearance issues.

    Podrobno
    4,49 $

    Na zalogi

  • EK-Quantum Torque Static FF 45° - Nickel

    EK-Quantum Torque Static FF 45° is a 45° adapter fitting with two female G1/4" threads.

    Podrobno
    5,99 $

    Na zalogi

  • EK-Pro G1/4 Barb Fitting 6mm - Nickel

    This is a 6mm G1/4" barb fitting, perfect for EK-Pro 6/12mm tubing Podrobno
    5,59 $

    Na zalogi

  • EK-Quantum Torque Compression Ring 6-Pack STC 13 - Nickel

    EK-Quantum Torque Compression Ring 6-Pack STC 13 - Nickel is a premium locking ring made for the EK-Quantum Torque STC 10/13 series fittings. It is not a stand-alone product, requiring an existing Torque fitting's barb.

    Podrobno
    37,99 $

    Out of stock

  • EK-Quantum Torque Micro Extender Static MM 7 - Nickel

    EK-Quantum Torque Micro Extender Static MM 7 is a premium male-threaded extender interconnect with male threads on both ends. It is used for connecting two water cooling components which both have female G1/4 threads. This extender is especially useful in situations where the port spacing is too low, or due to clearance issues.

    Podrobno
    4,49 $

    Na zalogi

na stran

Izdelki 41 do 50 od skupno 53

Stran:
  1. 2
  2. 3
  3. 4
  4. 5
  5. 6