EK-RAM Monarch Module - Nickel (2pcs)

EK-RAM Monarch Module is a heatsink adapter that allows virtually any (DDR-)SDRAM memory module (of any generation) to be liquid cooled in conjunction with EK-RAM Monarch series water blocks.

While this RAM heatsink adapter works with DDR5 ram, it does not cover the chips fully due to changes in size. 

Each heatsink consists of two separate plates, while the DIMM memory module is sandwiched in between. Heat transfer between the memory module and aluminum heatsink adapter is ensured by the use of an enclosed thermal pad. Between the EK-RAM Monarch Module Adapter and EK-RAM Monarch series water block, we recommend the use of electrically non-conductive thermal grease, i.e. EK-TIM Ectotherm.

This product is ready to be used only with double-sided (single or dual ranked as per JEDEC) DIMM memory modules. In case a single-sided DIMM module is used, one needs to use 1.5mm thick thermal pad where no memory chips are used (not enclosed). Factory-installed heatsink must be removed from each memory module prior to installation (if present).

This set contains two (2) EK-RAM Monarch Module Adapter heatsinks. Each of these items is made of CNC-machined high-quality aluminum and features a nickel finish.

Enclosed:
- EK-RAM Monarch Module Adapter (2 pcs)
- thermal pads
- mounting screws
- allen key 2mm

Made in Slovenia - EU!