Time remaining:

d h min sec

BLACK FRIDAY – EVERYTHING ON SALE

Lieferung:

EK-Quantum Vector RX 6800/6900 D-RGB - AMD Radeon Edition

Produkt-EAN: 3831109833391

Only 2 pieces left

265,99 $

239,39 $ -10 % 

Estimated Delivery Date: 8 December 2021
?
  • DHL Economy tracking: 9 December 2021
  • DHL Express with tracking: 8 December 2021
  • UPS with tracking: 8 December 2021

Finanzierung möglich

Teilen Sie den Kaufbetrag von 500 EUR/AUD/USD oder mehr mit Splitit in bis zu 3 zinslose monatliche Zahlungen auf.

Get the Ultimate Black Friday Bundle!

EK-Quantum Vector RX 6800/6900 D-RGB - AMD Radeon Edition

+
Black Friday Selection

Black Friday Selection

=
-15%
Full Price
Starts at 240,19 $
instead of 282,58 $

Details

EK-Quantum Vector RX 6800/6900 is a special edition 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for graphics cards based on the latest AMD® RDNA2™ architecture. This water block fits reference PCB designs of the Radeon RX 6800, RX 6800XT, and RX 6900 GPUs. For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator.

EK-Quantum Vector RX 6800/6900 D-RGB – AMD Radeon Edition

Special Edition EK-Quantum Vector RX 6800/6900 water block for reference AMD Radeon RX 6800 and 6900 GPUs

The Special Edition block stands out thanks to the black acetal top with aesthetic side-slopes that mimic the new graphics cards’ factory cooler. The top also features an ultra-clean, screwless design because the assembly is done from the backside of the block. The Radeon logo is illuminated by a dense addressable RGB strip allowing for a smooth D-RGB effect.

EK-Quantum Vector RX 6800/6900 water block is compatible with reference design Radeon RX 6800, RX6800 XT, and 6900 XT graphics cards. This Special Edition Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. 

These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. 

EK-Quantum Vector RX 6800/6900 D-RGB – AMD Radeon Edition

Fin array is populated by 35 microfins with 0.6mm wide microchannels that provide optimal cooling performance, without unnecessary flow restrictions or clogging hazards. 

This water block comes with a single-slot bracket PCI-E expansion for a slick and elegant look. The block is slightly thicker than one slot, to avoid having a steel bridge-plate between the VRM and core parts of the block.

The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper. The water block terminal is made of CNC-machined black POM acetal. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.

D-RGB lighting on EK-Quantum Vector RX 6800/6900 D-RGB water block

This water block boasts a total of 14 individually addressable D-RGB LEDs located under the Radeon logo. It is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. 

Included Backplate 

The included backplate improves the overall aesthetics of your graphics card, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM section.

Enclosed:

- EK-Quantum Vector RX 6800/6900 D-RGB - AMD Radeon Edition high-performance water block
- EK-Quantum Vector RX 6800/6900 - AMD Radeon Edition backplate
- RX 6800/6900 single slot IO bracket - Black
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts, and washers
- 2x black plugs G1/4”
- EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
- Thermal pads
- Thermal grease EK-TIM Ectotherm (1g)

Technical Specification:

- Dimensions: (LxHxW) - 266x133x27mm

Made in Slovenia - Europe!

ZU BEACHTEN:

  • This block is made for reference PCB RX 6800/6900 cards.
  • Due to the immense variety of fittings/barbs availablae on the market, we guarantee compatibility only with EK fittings.
  • Factory backplates are not compatible with this water block!
  • Check your toolbox if you are missing this special Hex adapter for some of the screws.
  • This product should NOT be installed with any aluminum Fluid Gaming parts!

Zusatzinformation

Option Nickel Acetal
Threads G1/4
Chip Manufacturer AMD Radeon

Haben Sie sich für dieses Produkt entschieden?

265,99 $

239,39 $ -10 % 

Only 2 pieces left

Brauchen Sie Hilfe? ekwb.com/customer-care

Sie könnten auch an folgenden Artikeln interessiert sein

EK-Loop D-RGB 2-Way Splitter Cable

EK-Loop D-RGB 2-Way Splitter Cable

6,49 $

5,84 $ -10 %

EK-Loop D-RGB 3-Way Splitter Cable

EK-Loop D-RGB 3-Way Splitter Cable

7,49 $

6,74 $ -10 %

EK-CoolStream Classic PE 360

EK-CoolStream Classic PE 360

99,99 $

89,99 $ -10 %

EK-CoolStream SE 360 (Slim Triple)

EK-CoolStream SE 360 (Slim Triple)

84,99 $

76,49 $ -10 %