V košarici nimate nobenega izdelka.
Dodatki
Dodatki
Accessories section of our stores includes everything you need for connecting components of the loop, thermal interface materials & compounds, LED diodes to make your build really stand out as unique, power cables and adapters and even some EK fashion products.
-
EK-Loop PCI-E 4.0 Riser Cable - 200mm
This is a Premium PCIe 4.0 x16 GPU Riser Cable. Works with both AMD RX6000 and NVIDIA 3000 series GPUs. Compatible with all motherboards, even ITX that require better signal integrity. Podrobno69,99 $Na zalogi
-
EK-RES X3 - Internal Tube 12/16 140mm
EK-RES X3 - Internal Tube 12/16 140mm is an upgrade tube for EK-RES X3 - Multiport TOP which further expands the use of EK-RES X3 series reservoirs.
Podrobno9,49 $Only 3 pieces left
-
EK-RES X3 - Internal Tube 12/16 40mm
EK-RES X3 - Internal Tube 12/16 40mm is an upgrade tube for EK-RES X3 - Multiport TOP which further expands the use of EK-RES X3 series reservoirs.
Podrobno6,49 $Na zalogi
-
EK-Quantum Torque Plug - Gold
EK-Quantum Torque Plug - Gold is a premium Quantum G1/4" plug for closing the unused ports on your water cooling equipment.
Podrobno5,99 $Na zalogi
-
EK-Quantum Torque Micro Plug - Gold
EK-Quantum Torque Micro Plug - Satin Titanium is a premium small-form-factor Quantum G1/4" plug for closing the unused ports on your water cooling equipment.
Podrobno5,49 $Na zalogi
-
EK-Quantum Torque Plug w/Badge - Gold
EK-Quantum Torque Plug w/Badge - Satin Titanium is a premium Quantum G1/4" plug for closing the unused ports on your water cooling equipment. Podrobno8,49 $Na zalogi
-
EK-Loop Torque Screwdriver - 0.6Nm
The EK-Loop Torque Screwdriver - 0.6Nm is a precision screwdriver with 5 enclosed bits that will allow you to precisely fasten screws. Assemble and maintain your water-cooling equipment without the risk of over-torquing and damaging your gear. It comes with standard bits like Allen (Hex) and Phillips ones, which will be ideal for most water-cooling products like CPU and GPU water blocks, fan and radiator screws, various pump/reservoir mounts, and much more.
Podrobno20,99 $Na zalogi
-
EK-Loop D-RGB LED Edge Diffused Strip (500mm) – White
EK-Loop D-RGB LED Edge Diffused Strip (500mm) – White is a specialized LED strip that has a side-illumination going through a diffuser. It can be utilized for more focused applications when you wish illumination on a specific location and as a detail light. It uses addressable RGB diodes, allowing full control of each diode separately.
Podrobno18,99 $Na zalogi
-
EK-Loop D-RGB LED Magnetic Kit (4pcs 400mm)
Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 400mm long and can replace standard RGB strips in CPU blocks, monoblocks, reservoirs, and pump-combos. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.
Technical data:
Podrobno52,99 $Na zalogi
-
EK-Loop D-RGB LED Magnetic Strip (600mm)
EK-Loop D-RGB LED Magnetic Strip (600mm) is a 600mm-long addressable RGB LED strip that connects to a PC motherboard or a D-RGB controller via a standard 3-pin 5V connector (+5V, Data, Blocked, Ground). It has a density of 54LEDs/m with a total of 33 separately controllable LEDs on its 600mm long strip. The primary form of mounting on a PC case is via magnets, but it also has a secondary option, an adhesive tape that can stick to any flat surface. It's utilized by removing the protective foil from the back of the strip. The strip is encased in a high-quality silicone housing improves light uniformity and protects the strip.
Podrobno15,99 $Na zalogi
