V košarici nimate nobenega izdelka.
Dodatki
Dodatki
Accessories section of our stores includes everything you need for connecting components of the loop, thermal interface materials & compounds, LED diodes to make your build really stand out as unique, power cables and adapters and even some EK fashion products.
-
EK-Quantum Torque Micro Plug - Gold
EK-Quantum Torque Micro Plug - Satin Titanium is a premium small-form-factor Quantum G1/4" plug for closing the unused ports on your water cooling equipment.
Podrobno5,99 $Only 4 pieces left
-
EK-Quantum Torque Plug - Gold
EK-Quantum Torque Plug - Gold is a premium Quantum G1/4" plug for closing the unused ports on your water cooling equipment.
Podrobno6,49 $Na zalogi
-
EK-Loop Heat Gun 2000W - EU Plug
This is a specialized tool for bending acrylic and PETG tubing but can be used in various other applications. It has two modes of operation, low (up to 250W) and high (up to 2000W). Podrobno54,99 $Na zalogi
-
EK-Loop Heat Gun 1500W - US Plug
This is a specialized tool for bending acrylic and PETG tubing but can be used in various other applications. It has two modes of operation, low (up to 250W) and high (up to 1500W). Podrobno54,99 $Na zalogi
-
EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs)
EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/12mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
Podrobno67,99 $Na zalogi
-
EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90° - Acrylic (6pcs)
EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/14mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
Podrobno74,99 $Na zalogi
-
EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° - Acrylic (6pcs)
EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 12/16mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
Podrobno79,99 $Only 2 pieces left
-
EK-HDC Fitting 14mm O-Ring (6pcs)
Replacement outer O-ring gaskets for EK-HDC 14mm fittings.
Podrobno3,99 $Na zalogi
-
EK-Loop Adapter Molex to SATA
The EK-Loop Adapter Molex to SATA enables you to connect your 4-pin MOLEX products - like D5 and DDC pumps to a SATA power connector on your PSU.
Podrobno5,99 $Na zalogi
-
EK-Loop Screwdriver Basic Set (49 Pcs)
The EK-Loop Screwdriver Basic Set includes an aluminum alloy handle with a strong magnetic bit socket, hexagonal grip, and swivel top – plus 48 precision driver bits inside a plastic tray.
Podrobno22,99 $Na zalogi
