The EK-Loop Adapter Molex to SATA enables you to connect your 4-pin MOLEX products - like D5 and DDC pumps to a SATA power connector on your PSU. 

Replacement Plexi top kit for EK-Quantum Velocity CPU water blocks. Water block top is made from CNC machined acrylic glass.

Replacement outer O-ring gaskets for EK-HDC 14mm fittings.

EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 12/16mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.

EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/14mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.

EK-Loop Hard Tube 12mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/12mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.

EK-Quantum Magnitude Accent - sTRX4 D-RGB is an interchangeable aesthetic frame for EK's new Magnitude sTRX4 water block. This accent is specifically made to bring dispersed lighting implementation and offer even lighting in the form of a halo all around Magnitude water block. It comes with an addressable D-RGB LED strip that contains 44 LEDs.

The EK-RGB 4-Way Splitter Cable allows users to connect up to four RGB products to one RGB source so that they can build an aesthetically beautiful lighting system. It features standard 4-pin RGB headers and the male-male connector pins are also included in the packaging.

The EK-Loop Connect - USB External Cable 1m will allow the user to connect their EK-Loop Connect controller unit to the PC via a standard USB connector that can be found on the back of the motherboard. This type of connection is beneficial to modders because it allows them to pre-program the controller using another PC.