Delivery: United States

Spare parts & Tools

Spare parts & Tools

Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
per page

Items 1 to 10 of 14 total

Page:
  1. 1
  2. 2
  • EK-Supremacy MX Copper base

    Replacement Copper base for EK-Supremacy MX CPU block.

    Learn More
    $20.49

    Limited quantity

  • EK-Supremacy EVO Copper base - Nickel

    Replacement Nickel-plated Copper base for EK-Supremacy EVO CPU block.

    Learn More
    $27.99

    Limited quantity

  • EK-Supremacy EVO Copper base

    Replacement Copper base for EK-Supremacy EVO CPU water block.

    Learn More
    $22.49

    Limited quantity

  • EK-RES X3 - TUBE 400 (354mm)

    Replacement tube for EK-RES X3 series reservoirs and EK Fluid Gaming pump reservoir combo.

    Learn More
    $33.99

    In stock

  • EK-RES X3 - TUBE 250 (204mm)

    Replacement tube for EK-RES X3 series reservoirs and EK Fluid Gaming pump reservoir combo.

    Learn More
    $22.99

    In stock

  • EK-RES X3 - Multiport TOP WHITE

    The EK-RES X3 - Multiport TOP WHITE is an alternative white top end cap for EK-RES X3 series reservoir which offers additional port configurations.

    Learn More
    $21.99

    In stock

  • EK-Loop Modulus Hard Tube Bending Tool - 16mm

    EK-Loop Modulus Hard Tube Bending Tool - 16mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 16mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.

    These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.

    Learn More
    $29.99

    In stock

  • EK-Loop Modulus Hard Tube Bending Tool - 14mm

    EK-Loop Modulus Hard Tube Bending Tool - 14mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 14mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.

    These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.

    Learn More
    $29.99

    In stock

  • EK-Loop Modulus Hard Tube Bending Tool - 12mm

    EK-Loop Modulus Hard Tube Bending Tool - 12mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 12mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.

    These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.

    Learn More
    $29.99

    In stock

  • EK-Leak Tester

    The EK-Leak Tester is a fast and safe way of testing for possible leaks in your liquid cooling loop. While traditional leak testing works, it requires hours before very small leaks are detected and then things can become messy. The EK-Leak Tester does the job almost instantly!

    Learn More
    $39.99

    No stock

per page

Items 1 to 10 of 14 total

Page:
  1. 1
  2. 2