Delivery:

Spare parts & Tools

Spare parts & Tools

Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
per page

Items 1 to 10 of 20 total

Page:
  1. 1
  2. 2
  • EK-Loop Soft Tube Cutting Tool

    EK-Loop Soft Tube Cutter is a small handy tool specifically made for soft tube cutting. It is compatible with various flexible soft tubing types such as PVC, EPDM, Norprene, silicone, etc. The maximum size compatibility of the cutter is 16mm (5/8'') OD. This soft tube cutter makes a precise even cut allowing perfect fitment onto the fitting and superior aesthetics.

    Learn More
    $5.99

    In stock

  • EK-Loop Foldable Filling Bottle

    A handy 1L filling bottle designed to make your loop filling process much easier. Very convenient for mixing the EK-CryoFuel concentrates with distilled water. The telescopic tube of the filling bottle can reach even the most remote and crammed fill ports. The squeeze bottle can also be used to suck the coolant out of your reservoir making system draining an easy task as well. Just squeeze the bottle, insert the tube into the coolant and let the vacuum take care of the rest.

    Learn More
    $5.99

    In stock

  • EK-Loop D-RGB LED Strip - 180mm

    Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 180mm long and can replace standard RGB strips in CPU blocks, monoblocks, and pumps. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.

    Learn More
    $6.99

    In stock

  • EK-Loop RGB LED PCB Board - 90mm

    Replacement RGB LED module on a hard PCB. Made for replacing the stick-out LED module in EK-Quantum Vector GPU water blocks. It is 90mm long and has an additional cable for the terminal LEDs to connect to it. The strip is connected via a 4-pin connector to supported 12V headers that are present on several high-end motherboards.

    Learn More
    $6.99

    In stock

  • EK-FC Terminal Cover

    The special plastic cover over the block Terminal. This add-on is designed to reveal the graphics card model, visible from the side.

    Learn More

    $16.99

    $6.79 -60 %

    In stock

  • Filling Bottle (1000mL)

    A handy 1L filling bottle designed to make your loop filling process much easier. Very convenient for mixing the EK-CryoFuel concentrates with distilled water. The telescopic tube of the filling bottle can reach even the most remote and crammed fill ports. The squeeze bottle can also be used to suck the coolant out of your reservoir making system draining an easy task as well. Just squeeze the bottle, insert the tube into the coolant and let the vacuum take care of the rest.

    Learn More
    $7.99

    In stock

  • EK-RES X3 Holder 60mm WHITE(2pcs)

    Spare WHITE Reservoir Holder for cylindrical reservoirs 60mm in diameter.

    Learn More
    $7.99

    Only 3 pieces left

  • EK-HD Tube 12/16mm 2-Slot (2 pcs)

    EK-HD Tube is used as an alternative method for connecting multiple GPUs (SLI/CrossFireX) with EK-HD Adapter fittings. For use with PCI-Express slots 40.6mm (1.6" apart).

    Learn More
    $5.99

    In stock

  • EK-RES X3 Holder 60mm (2pcs)

    Spare Reservoir Holder for cylindrical reservoirs 60mm in diameter.

    Learn More
    $6.99

    In stock

  • Screwdriver UNIOR 621 CR TX 6x60

    High quality screwdriver with TX profile - TX 6.

    Learn More
    $5.88

    Only 3 pieces left

per page

Items 1 to 10 of 20 total

Page:
  1. 1
  2. 2