Spare parts & Tools
Spare parts & Tools
-
EK-Loop D-RGB LED Strip - 180mm
Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 180mm long and can replace standard RGB strips in CPU blocks, monoblocks, and pumps. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.
Learn More$8.49In stock
-
EK-Loop D-RGB LED Strip - 400mm
Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 400mm long and can replace standard RGB strips in CPU blocks, monoblocks, reservoirs, and pump-combos. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.
Technical data:
Learn More$11.49In stock
-
EK-Loop D-RGB LED Strip Dense - 200mm
Replacement individually addressable D-RGB strip with densely packed LEDs that is used for upgrading existing EK products. The strip is 200mm long and features 30 diodes for 15 diodes per 100mm. It can replace standard RGB strips in CPU blocks, monoblocks, reservoirs, and pump-combos. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards.
Learn More$14.49In stock
-
EK-Loop Foldable Filling Bottle
A handy 1L filling bottle designed to make your loop filling process much easier. Very convenient for mixing the EK-CryoFuel concentrates with distilled water. The telescopic tube of the filling bottle can reach even the most remote and crammed fill ports. The squeeze bottle can also be used to suck the coolant out of your reservoir making system draining an easy task as well. Just squeeze the bottle, insert the tube into the coolant and let the vacuum take care of the rest.
Learn More$5.93In stock
-
EK-Loop Hacksaw 15cm - Black
A convenient hacksaw tool is used for sawing off hard tubes made of acrylic or PETG Learn More$18.99In stock
-
EK-Loop Hard Tube 12mm 0.5m - Acrylic (2pcs)
EK-HD Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.
For expert users only!
Learn More$9.99Available for order: This product is expected to become available on May 7, 2024 if you order it now
-
EK-Loop Heat Gun 1500W - US Plug
This is a specialized tool for bending acrylic and PETG tubing but can be used in various other applications. It has two modes of operation, low (up to 250W) and high (up to 1500W). Learn More$54.99In stock
-
EK-Loop Heat Gun 2000W - EU Plug
This is a specialized tool for bending acrylic and PETG tubing but can be used in various other applications. It has two modes of operation, low (up to 250W) and high (up to 2000W). Learn More$54.99In stock
-
EK-Loop Hex Key Screw Set M4x20mm - Black (3pcs)
A set of 3 M4 screws of 20mm length Learn More$4.49In stock
-
EK-Loop Hex Key Screw Set M4x27mm - Black (3pcs)
A set of 3 M4 screws of 27mm length with a hex-key head. Learn More$4.49In stock