V košarici nimate nobenega izdelka.
Rezervni deli in orodja
Rezervni deli in orodja
Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
-
EK-UNI Holder 50/70
EK-UNI Holder 50/70 omogoča različne namestitve radiatorjev znotraj računalniškega ohišja.
Podrobno7,49 $Na zalogi
-
EK-Supremacy EVO Backplate
Set hrbtnih plošč za EK-Supremacy EVO vodne bloke.
Podrobno8,49 $Na zalogi
-
EK-RES X3 - Anticyclone (LONG)
Nadomestni del za EK-RES X3 - Anticyclone (DOLG).
Podrobno7,49 $Na zalogi
-
EK-RES X3 - Anticyclone (SHORT)
Nadomestni del za EK-RES X3 - Anticiklon (KRATEK)
Podrobno7,49 $Na zalogi
-
EK-RES X3 Holder 60mm (2pcs)
Rezervni nosilci za cilindrični rezervoar s premerom 60mm.
Podrobno8,49 $Na zalogi
-
EK-Loop D-RGB LED Strip - 180mm
Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 180mm long and can replace standard RGB strips in CPU blocks, monoblocks, and pumps. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.
Podrobno8,49 $Na zalogi
-
EK-Loop Hard Tube 12mm 0.5m - Acrylic (2pcs)
EK-HD Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.
For expert users only!
Podrobno -
EK-Loop Standoff M3.5/M2.5x2.5 (10pcs)
M3.5/M2.5x2.5 standoffs Podrobno7,99 $Na zalogi
