Ice-Cold Deals are here! Get UP TO 50% OFF + a Special Gift for orders over $1500!   

Ends in: d h min sec
Shop & Save
Dostava:

Rezervni deli in orodja

Rezervni deli in orodja

Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
na stran

Izdelki 1 do 10 od skupno 11

Stran:
  1. 1
  2. 2
  • EK-RES X3 - TOP

    EK-RES X3 TOP White, je nadomestni zaključni pokrov za EK-RES X3 serijo rezervoarjev in ostalih RES X3 osnovnih delov.

    Podrobno
    9,49 $

    Na zalogi

  • EK-RES X3 - TOP WHITE

    EK-RES X3 TOP White, je nadomestni zaključni pokrov za EK-RES X3 serijo rezervoarjev in ostalih RES X3 osnovnih delov.

    Podrobno
    9,49 $

    Na zalogi

  • EK-RES X3 Holder 60mm (2pcs)

    Rezervni nosilci za cilindrični rezervoar s premerom 60mm.

    Podrobno
    7,49 $

    Na zalogi

  • EK-RES X3 Holder 60mm WHITE(2pcs)

    Beli nosilci za cilindrični rezervoar s premerom 60mm.

    Podrobno
    8,49 $

    Na zalogi

  • EK-UNI Holder DDC Spider (140mm FAN)

    EK-UNI Pump Holder (140mm FAN) je elegantna rešitev za montažo različnih EK vodnih črpalk na pritrdilne luknje standardnega 140mm ventilatorja.

     

    Podrobno
    9,49 $

    Na zalogi

  • Filling Bottle (1000mL)

    Priročna 1l plastenka za polnjenje hladilnega sistema, katera omogoča polnjenje še tako kompleksnih hladilnih sistemov z hladilno tekočino. Ker je plastenko moč stiskati, je kot nalašč idelana tudi za praznenje hladilnega sistema, saj z tem pripomoremo k lažji drenaži celotnega hladilnega sistema.

    Podrobno
    8,49 $

    Na zalogi

  • EK-Revo D5 Pump Mount

    The EK-Revo D5 pump mount is compatible with every D5 pump on the market (60mm diameter). It offers maximum flexibility allowing installation at any angle within 360° of rotation.

     

    Podrobno
    9,99 $

    Na zalogi

  • EK-FC Terminal Cover

    The special plastic cover over the block Terminal. This add-on is designed to reveal the graphics card model, visible from the side.

    Podrobno

    17,99 $

    9,00 $ -50 %

    Na zalogi

  • EK-Loop D-RGB LED Strip - 180mm

    Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 180mm long and can replace standard RGB strips in CPU blocks, monoblocks, and pumps. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.

    Podrobno
    7,49 $

    Na zalogi

  • EK-Loop Hard Tube 12mm 0.5m - Acrylic (2pcs)

    EK-HD Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.

    For expert users only!

    Podrobno
    9,49 $

    Na zalogi

na stran

Izdelki 1 do 10 od skupno 11

Stran:
  1. 1
  2. 2