Lieferung:

ERSATZTEILE & WERKZEUGE

ERSATZTEILE & WERKZEUGE

Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
pro Seite

Artikel 1 bis 10 von 15 gesamt

Seite:
  1. 1
  2. 2
  • EK-RES X3 - Internal Tube 12/16 140mm

    EK-RES X3 - Internal Tube 12/16 140mm is an upgrade tube for EK-RES X3 - Multiport TOP which further expands the use of EK-RES X3 series reservoirs.

    Mehr erfahren
    9,49 $

    Verfügbar

  • EK-Loop Hard Tube 12mm 0.5m - Acrylic (2pcs)

    EK-HD Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.

    For expert users only!

    Mehr erfahren
    9,49 $

    Verfügbar

  • EK-Loop D-RGB LED Strip - 180mm

    Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 180mm long and can replace standard RGB strips in CPU blocks, monoblocks, and pumps. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.

    Mehr erfahren
    7,49 $

    Verfügbar

  • EK-Loop RGB LED PCB Board - 90mm

    Replacement RGB LED module on a hard PCB. Made for replacing the stick-out LED module in EK-Quantum Vector GPU water blocks. It is 90mm long and has an additional cable for the terminal LEDs to connect to it. The strip is connected via a 4-pin connector to supported 12V headers that are present on several high-end motherboards.

    Mehr erfahren
    7,49 $

    Verfügbar

  • EK-Quantum Velocity Frame - Nickel

    Aesthetical cover frame for the EK-Velocity CPU water block in order to cater to the philosophy of the EK Quantum Lineup. Users are able to replace their existing aesthetical frame covers and to further customize their high-end liquid cooling loop. 

    Mehr erfahren

    10,49 $

    8,39 $ -20 %

    Verfügbar

  • EK-Revo D5 Pump Mount

    The EK-Revo D5 pump mount is compatible with every D5 pump on the market (60mm diameter). It offers maximum flexibility allowing installation at any angle within 360° of rotation.

     

    Mehr erfahren
    9,99 $

    Verfügbar

  • Filling Bottle (1000mL)

    A handy 1L filling bottle designed to make your loop filling process much easier. Very convenient for mixing the EK-CryoFuel concentrates with distilled water. The telescopic tube of the filling bottle can reach even the most remote and crammed fill ports. The squeeze bottle can also be used to suck the coolant out of your reservoir making system draining an easy task as well. Just squeeze the bottle, insert the tube into the coolant and let the vacuum take care of the rest.

    Mehr erfahren
    8,49 $

    Verfügbar

  • EK-UNI Holder DDC Spider (140mm FAN)

    EK-UNI Holder DDC Spider (140mm FAN) is a mounting adapter plate for attaching any Xylem DDC powered EK-XRES and -XTOP series water pumps to a standard 140mm fan mounting hole pattern in your computer chassis.

    Mehr erfahren
    9,49 $

    Verfügbar

  • EK-VGA Easy Mount HF - Nickel

    New mouting mechanism for best performing universal GPU waterblocks in the world - the EK-VGA Supreme HF.

    This is mounting mechanism only. Waterblock itself, the thermal grease or fittings may be purchased separately through our webshop.

    Mehr erfahren
    9,36 $

    Verfügbar

  • EK-RES X3 Holder 60mm WHITE(2pcs)

    Spare WHITE Reservoir Holder for cylindrical reservoirs 60mm in diameter.

    Mehr erfahren
    8,49 $

    Verfügbar

pro Seite

Artikel 1 bis 10 von 15 gesamt

Seite:
  1. 1
  2. 2