Sie haben keine Artikel im Warenkorb.
ERSATZTEILE & WERKZEUGE
ERSATZTEILE & WERKZEUGE
Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
-
EK-RES X3 - TUBE 250 (204mm)
Replacement tube for EK-RES X3 series reservoirs and EK Fluid Gaming pump reservoir combo.
Mehr erfahren26,99 $Verfügbar
-
EK-Quantum Magnitude Accent - D-RGB
EK-Quantum Magnitude Accent - D-RGB is an interchangeable aesthetic frame for EK's new Magnitude water block. This accent is specifically made to bring dispersed lighting implementation and offer even lighting in the form of a halo all around Magnitude water block. It comes with an addressable D-RGB LED strip that contains 30 LEDs.
Mehr erfahren34,99 $Verfügbar
-
EK-Loop Modulus Hard Tube Bending Tool - 12mm
EK-Loop Modulus Hard Tube Bending Tool - 12mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 12mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.
These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.
Mehr erfahren34,99 $Out of stock
-
EK-Loop Modulus Hard Tube Bending Tool - 14mm
EK-Loop Modulus Hard Tube Bending Tool - 14mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 14mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.
These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.
Mehr erfahren34,99 $Verfügbar
-
EK-Loop Modulus Hard Tube Bending Tool - 16mm
EK-Loop Modulus Hard Tube Bending Tool - 16mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 16mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.
These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.
Mehr erfahren34,99 $Verfügbar
-
EK-Loop Leak Tester Flex
The EK-Loop Leak Tester Flex is a fast and safe way of testing for possible leaks in your liquid cooling loop. While traditional leak testing works, it requires hours before very small leaks are detected and then things can become messy. The EK-Loop Leak Tester Flex does the job within minutes.
Mehr erfahren32,99 $Verfügbar
