Ice-Cold Deals are here! Get UP TO 50% OFF + a Special Gift for orders over $1500!   

Ends in: d h min sec
Shop & Save
Lieferung:

ERSATZTEILE & WERKZEUGE

ERSATZTEILE & WERKZEUGE

Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
pro Seite

Artikel 41 bis 50 von 104 gesamt

Seite:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  • EK-Quantum Magnitude Accent - sTRX4 D-RGB

    EK-Quantum Magnitude Accent - sTRX4 D-RGB is an interchangeable aesthetic frame for EK's new Magnitude sTRX4 water block. This accent is specifically made to bring dispersed lighting implementation and offer even lighting in the form of a halo all around Magnitude water block. It comes with an addressable D-RGB LED strip that contains 44 LEDs.

    Mehr erfahren

    37,99 $

    28,49 $ -25 %

    Verfügbar

  • iFixit Mako Precision Bit Set

    iFixit Mako Precision Bit Set includes iFixit's 4 mm aluminum screwdriver handle with magnetic bit socket, knurled grip, and swivel top—plus 64 precision driver bits and a flexible extension.

    Mehr erfahren
    40,99 $

    Verfügbar

  • EK-Loop Hard Tube 12mm 0.5m - Acrylic (2pcs)

    EK-HD Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.

    For expert users only!

    Mehr erfahren
    9,49 $

    Verfügbar

  • EK-Loop Soft Tube Cutting Tool

    EK-Loop Soft Tube Cutter is a small handy tool specifically made for soft tube cutting. It is compatible with various flexible soft tubing types such as PVC, EPDM, Norprene, silicone, etc. The maximum size compatibility of the cutter is 16mm (5/8'') OD. This soft tube cutter makes a precise even cut allowing perfect fitment onto the fitting and superior aesthetics.

    Mehr erfahren
    6,49 $

    Verfügbar

  • EK-Loop Foldable Filling Bottle

    A handy 1L filling bottle designed to make your loop filling process much easier. Very convenient for mixing the EK-CryoFuel concentrates with distilled water. The telescopic tube of the filling bottle can reach even the most remote and crammed fill ports. The squeeze bottle can also be used to suck the coolant out of your reservoir making system draining an easy task as well. Just squeeze the bottle, insert the tube into the coolant and let the vacuum take care of the rest.

    Mehr erfahren
    6,49 $

    Verfügbar

  • EK-Loop D-RGB LED Strip - 180mm

    Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 180mm long and can replace standard RGB strips in CPU blocks, monoblocks, and pumps. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.

    Mehr erfahren
    7,49 $

    Verfügbar

  • EK-Loop D-RGB LED Strip - 400mm

    Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 400mm long and can replace standard RGB strips in CPU blocks, monoblocks, reservoirs, and pump-combos. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards or EK-Loop Connect.

    Technical data:

    Mehr erfahren
    10,49 $

    Verfügbar

  • EK-Loop D-RGB LED Strip Dense - 200mm

    Replacement individually addressable D-RGB strip with densely packed LEDs that is used for upgrading existing EK products. The strip is 200mm long and features 30 diodes for 15 diodes per 100mm. It can replace standard RGB strips in CPU blocks, monoblocks, reservoirs, and pump-combos. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards.

    Mehr erfahren
    12,99 $

    Verfügbar

  • EK-Loop Modulus Hard Tube Bending Tool - 16mm

    EK-Loop Modulus Hard Tube Bending Tool - 16mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 16mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.

    These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.

    Mehr erfahren
    31,99 $

    Verfügbar

  • EK-Loop Modulus Hard Tube Bending Tool - 14mm

    EK-Loop Modulus Hard Tube Bending Tool - 14mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 14mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.

    These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.

    Mehr erfahren
    31,99 $

    Verfügbar

pro Seite

Artikel 41 bis 50 von 104 gesamt

Seite:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7