V košarici nimate nobenega izdelka.
Rezervni deli in orodja
Rezervni deli in orodja
Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
-
OR - CPU Supremacy (EPDM 70)
Replacement O-ring for EK-Supremacy EVO and MX series water block.
Podrobno2,49 $Na zalogi
-
EK-HDC Fitting 16mm O-Ring (6pcs)
Replacement outer O-ring gaskets for EK-HDC 16mm fittings.
Podrobno3,99 $Na zalogi
-
EK-HDC Fitting 12mm O-Ring (6pcs)
Replacement O-ring gaskets for EK-HDC 12mm fittings
Podrobno3,99 $Na zalogi
-
EK-D5 Pump O-Ring
Replacement O-ring gasket for all EK-D5 X-TOP and X-RES series products.
Podrobno3,99 $Na zalogi
-
EK-RES X3 O-Ring
Replacement internal O-ring gasket for all EK-RES X3 reservoirs.
Podrobno3,99 $Na zalogi
-
EK-FC Terminal Screw Set (3pcs)
A set of three (3) spare screws for EK-FC Terminal.
Podrobno3,99 $
0,96 $ -76 %
Na zalogi
-
EK-XRES Revo Anti-Vortex Foam
Replacement part for EK-XRES - Anti-Vortex Foam.
Podrobno3,99 $Na zalogi
-
EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
The EK-Loop Multi Allen Key is a multi-purpose tool that replaces the standard 6mm, 8mm, and 9mm Allen key, while it can also be used to operate acetal plugs (with the line style groove). The key does not only replace all of the crucial Allen key formats used for building a liquid-cooled PC but also helps protect your liquid cooling gear.
Podrobno2,99 $Na zalogi
-
EK-HDC Fitting 14mm O-Ring (6pcs)
Replacement outer O-ring gaskets for EK-HDC 14mm fittings.
Podrobno3,99 $Na zalogi
-
EK-Loop Nut Set M4 - Black (20pcs)
A set of twenty (20) M4 nuts.
Podrobno3,49 $Na zalogi
