⚡ Seize Today's Limited Easter Offer! ⚡

Flash Deals Expire In: d h min sec
Shop Now
Lieferung:

ERSATZTEILE & WERKZEUGE

ERSATZTEILE & WERKZEUGE

Spare parts for your liquid cooling gear and tools. The same tools that you needed to build your computer will use when building a liquid cooling loop. We recommend flat-head and Philips-head screwdrivers, anti-static wrist wrap, needle-nose pliers and some paper towels. To cut the tubing we recommend Stanley/Craft knife, kitchen scissors or a pair of dedicated tubing clippers. In this section are the tools that you might need when installing our products.
pro Seite

Artikel 1 bis 10 von 17 gesamt

Seite:
  1. 1
  2. 2
  • EK-Quantum Velocity² - AM5 Backplate

    AM5 backplate that enables the Velocity² AM4 water blocks to be mounted on the AM5-socketed motherboards Mehr erfahren
    20,99 $

    Verfügbar

  • 38,99 $

    Out of stock

  • 39,99 $

    Verfügbar

  • 39,99 $

    Only 3 pieces left

  • EK-Loop Leak Tester Flex

    The EK-Loop Leak Tester Flex is a fast and safe way of testing for possible leaks in your liquid cooling loop. While traditional leak testing works, it requires hours before very small leaks are detected and then things can become messy. The EK-Loop Leak Tester Flex does the job within minutes.

    Mehr erfahren
    32,99 $

    Verfügbar

  • EK-Loop Torque Screwdriver - 0.6Nm

    The EK-Loop Torque Screwdriver - 0.6Nm is a precision screwdriver with 5 enclosed bits that will allow you to precisely fasten screws. Assemble and maintain your water-cooling equipment without the risk of over-torquing and damaging your gear. It comes with standard bits like Allen (Hex) and Phillips ones, which will be ideal for most water-cooling products like CPU and GPU water blocks, fan and radiator screws, various pump/reservoir mounts, and much more. 

    Mehr erfahren
    22,99 $

    Verfügbar

  • EK-Loop Screwdriver Basic Set (49 Pcs)

    The EK-Loop Screwdriver Basic Set includes an aluminum alloy handle with a strong magnetic bit socket, hexagonal grip, and swivel top – plus 48 precision driver bits inside a plastic tray.

    Mehr erfahren
    22,99 $

    Verfügbar

  • EK-Loop Modulus Hard Tube Bending Tool - 16mm

    EK-Loop Modulus Hard Tube Bending Tool - 16mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 16mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.

    These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.

    Mehr erfahren
    34,99 $

    Verfügbar

  • EK-Loop Modulus Hard Tube Bending Tool - 14mm

    EK-Loop Modulus Hard Tube Bending Tool - 14mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 14mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.

    These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.

    Mehr erfahren
    34,99 $

    Verfügbar

  • EK-Loop Modulus Hard Tube Bending Tool - 12mm

    EK-Loop Modulus Hard Tube Bending Tool - 12mm is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 12mm OD. These tools act as a mold which helps the user to form the tubing in the desired shape. These tools are made to be timeless and sturdy, as they are machined out of a solid piece of black POM acetal.

    These tools come in 3 variants depending on the outer diameter (OD) of the tubing. Available models are for tube size of 12mm, 14mm, and 16mm.

    Mehr erfahren
    34,99 $

    Verfügbar

pro Seite

Artikel 1 bis 10 von 17 gesamt

Seite:
  1. 1
  2. 2