Trde cevi
Trde cevi
-
EK-HD Tube D.I.Y. Kit 10&12mm
S EK-HD Tube D.I.Y. Kitom 10mm lahko popolnoma prilagodite trde akrilne cevi Ø10 in Ø12 mm.
Podrobno22,99 $Na zalogi
-
EK-Loop Hard Tube 14mm 0.5m - Acrylic (2pcs)
EK-Loop Hard Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.
Podrobno12,49 $Na zalogi
-
EK-Loop Hard Tube 16mm 0.5m - Acrylic (2pcs)
EK-HD Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.
For expert users only!
Podrobno14,49 $Na zalogi
-
EK-HD Tube Reamer
The EK-HD Tube Reamer is an external and internal tube reamer. The tool is used to deburr the remains of freshly cut tubing.
Podrobno14,49 $Na zalogi
-
EK-Loop Hard Tube 12mm 0.5m - Acrylic (2pcs)
EK-HD Tube is solid type extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.
For expert users only!
Podrobno9,99 $Na voljo za naročilo: This product is expected to become available on May 7, 2024 if you order it now
-
EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90° - Acrylic (6pcs)
EK-Loop Hard Tube 14mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 10/14mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
Podrobno74,99 $Na zalogi
-
EK-HD PETG Tube 12/16mm 1000mm (2pcs)
EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends.
For expert users only!
Podrobno19,99 $Na zalogi
-
EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° - Acrylic (6pcs)
EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° - Acrylic (6pcs) is a 6-pack of 12/16mm(ID/OD) acrylic tubing bent to a 90-degree angle. Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
Podrobno79,99 $Only 1 piece left
-
EK-Loop Metal Tube Cutting Tool
Metal Tube Cutting Tool for PC water-cooling metal tubes Podrobno19,99 $Na zalogi
-
EK-HD PETG Tube 12/16mm 500mm (2pcs)
Trda cev iz PETG, namenjena povezavi komponent v kombinaciji s priključki za cevi EK-HD Adapter in EK-HDC Fitting.
Podrobno9,99 $Na zalogi