V košarici nimate nobenega izdelka.
Kabli za prižig in adapterji
Kabli za prižig in adapterji
Cable management is something we take very seriously! Do you want to hook multiple EK-Vardar fans to a single motherboard connector? We got you covered.
-
EK-Cable mini 4-pin to 2-pin PWM (1000mm)
EK-Cable mini 4-pin to 2-pin PWM (1000mm) is a simple adapter cable for connecting your GPU to any EK-XLC Predator or EK MLC unit and thus controlling the PWM profiles based on the graphics card temperature.
Podrobno4,49 $Na zalogi
-
EK-Cable mini 4-pin to 2-pin PWM (500mm)
Kabel za povezavo vaše grafične kartice s CPU FAN headerjem na vaši matični plošči. S pomočjo tega kabla lahko uravnanvate PWM profile glede na temperaturo vaše grafične kartice.
Podrobno4,49 $Na zalogi
-
EK-Loop OmniLink MF Extension - 100mm
Extend the reach of the OmniLink cable harness by 100mm Podrobno5,99 $Na zalogi
-
EK-Loop OmniLink 2-Way Splitter - 100mm
Connect up to two OmniLink products or to connect two separate OmniLink cable harnesses. Podrobno6,99 $Na zalogi
-
EK-RGB Extension Cable (510mm)
The EK-RGB 4-Way Splitter Cable allows users to connect up to four RGB products to one RGB source so that they can build an aesthetically beautiful lighting system. It features standard 4-pin RGB headers and the male-male connector pins are also included in the packaging.
Podrobno7,49 $
6,44 $ -14 %
Na zalogi
-
EK-Loop Adapter Molex to SATA
The EK-Loop Adapter Molex to SATA enables you to connect your 4-pin MOLEX products - like D5 and DDC pumps to a SATA power connector on your PSU.
Podrobno5,99 $Na zalogi
-
EK-Cable PWM Fan Adapter for GPU (50cm)
Kabel za povezavo vaše grafične kartice s CPU FAN headerjem na vaši matični plošči. S pomočjo tega kabla lahko uravnanvate PWM profile glede na temperaturo vaše grafične kartice.
Podrobno4,49 $Na zalogi
-
EK-Loop D-RGB Extension Cable (510mm)
The EK-RGB 4-Way Splitter Cable allows users to connect up to four RGB products to one RGB source so that they can build an aesthetically beautiful lighting system. It features standard 4-pin RGB headers and the male-male connector pins are also included in the packaging.
Podrobno5,99 $Na zalogi
-
EK-Cable PWM Fan Extension (30cm)
EK-Cable Splitter 4-Fan PWM Extended je razdelilnik, ki omogoča priklop do štiri (4) ventilatorje na en PWM priključek na matični plošči.
Podrobno4,49 $Na zalogi
-
EK-Cable Y-Splitter 2-Fan PWM (10cm)
EK-Cable Y-Splitter 3-Fan PWM je preprost 1-na-2 razdelilnik za DC ali PWM ventilatorje, ki se ga priklopi na 4-pin PWM oziroma 3-pin DC ventilatorski priključek na matični plošči.
Podrobno4,49 $Na zalogi
