Replacement individually addressable D-RGB strip with densely packed LEDs that is used for upgrading existing EK products. The strip is 200mm long and features 30 diodes for 15 diodes per 100mm. It can replace standard RGB strips in CPU blocks, monoblocks, reservoirs, and pump-combos. The strip is connected via a 3-pin connector to supported 5V headers that are present on most modern motherboards.

EK-Loop D-RGB LED Magnetic Strip (600mm) is a 600mm-long addressable RGB LED strip that connects to a PC motherboard or a D-RGB controller via a standard 3-pin 5V connector (+5V, Data, Blocked, Ground). It has a density of 54LEDs/m with a total of 33 separately controllable LEDs on its 600mm long strip. The primary form of mounting on a PC case is via magnets, but it also has a secondary option, an adhesive tape that can stick to any flat surface. It's utilized by removing the protective foil from the back of the strip. The strip is encased in a high-quality silicone housing improves light uniformity and protects the strip.

EK-Loop D-RGB LED Edge Diffused Strip (500mm) – White is a specialized LED strip that has a side-illumination going through a diffuser. It can be utilized for more focused applications when you wish illumination on a specific location and as a detail light. It uses addressable RGB diodes, allowing full control of each diode separately.