EKWaterBlocks Shop

Skip to Main Content »

Search Site

Category Navigation:

You're currently on:

EK-RES X3 150

Double click on above image to view full picture

Zoom Out
Zoom In

EK-RES X3 150

EAN: 3831109841013

Be the first to review this product

Limited quantity!

Incl. 22% VAT: € 48.75
Add Items to Cart
OR

Quick Overview

The EK-RES X3 reservoir from EK CSQ design line is an improved version of renown EK-Multioption RES X2 reservoirs released three years ago.

PLEASE NOTE:
- Do not use or clean reservoir with alcohol derivates or other solvents as acrylic may crack!

Product Description

The EK-RES X3 reservoir from EK CSQ design line is an improved version of renown EK-Multioption RES X2 reservoirs released three years ago. Compared to EK-Multioption RES X2 product line the EK-RES X3 reservoirs featire improved inlet/outlet port configuration for easier and more straightforward fitting configuration and tube routing. Improvements have been made on the reservoir's bottom terminal which has been optimized for best flow. Vortex ouccurance has also been diminished by the use of enclosed anti-cyclone as well as additional PE foam.

All these new features result in easier-than-ever mounting, filling and quickest bleeding of air.

Reservoir is manufactured of premium quality 60mm acrylic tube and POM Acetal end caps. The sealing is performed by quality EPDM rubber washers.

New RES X3 comes with a pair of EK design reservoir holders using adjustable fastening force controlled by enclosed Allen key.

Technical data:
- Installation height: 150mm
- Diamter: 60mm
- Capacity: ~240ml
- Weight (netto): 265g

Enclosed within delivery:
- EK-Multioption RES X3
- Pair of EK reservoir holders with mounting screws
- 2 × G1/4 extenders
- 4 × G1/4 Plugs
- 1 × 6mm Allen key for plugs
- 1 × 2,5mm allen key for reservoir holders
- 1 × polyether anti-cyclon foam

Made in Slovenia - EU!

IMPORTANT NOTES:
1. When using ports #3, #4 or #6 it is mandatory to use the enclosed EK-Extender G1/4 (EAN: 3831109845165) due the ports being recessed into the plastic Reservoir Bottom.
2. When using EK-Extender G1/4 make sure not to use fittings or barbs with G1/4 thread longer than 5mm! All EK-PSC and High Flow fittings are compatible!
3. When using ports #1 and #2 make sure not to use fittings or barbs with diameter larger than 25mm! All EK-PSC and High Flow fittings are compatible!
4. EK recommends the use of EK-PSC fittings. When using fittings other than EK-PSC series please use hose clamps or appropriate substitute to secure the tubing to the barb. The use of biocide containing and corrosion inhibiting coolant is always recommended for any liquid cooling system.
5. Port #6 of EK-RES X3 series reservoir should only be used to connect this reservoir with external fill port!

Additional Information

Threads G1/4

You may also be interested in the following product(s)

EK-RES X3 - Multiport TOP

EK-RES X3 - Multiport TOP
Incl. 22% VAT: € 15.20

EK-RES X3 - TOP WHITE

EK-RES X3 - TOP WHITE
Incl. 22% VAT: € 5.54

EK-RES X3 - Multiport TOP WHITE

EK-RES X3 - Multiport TOP WHITE
Incl. 22% VAT: € 16.71

EK-RES X3 - Bottom WHITE

EK-RES X3 - Bottom WHITE
Incl. 22% VAT: € 13.36

Product Tags

Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
 

My Cart

You have no items in your shopping cart.

Compare Products

You have no items to compare.

EKWaterBlocks New Products
EKWaterBlocks Special Prices
coolingconfigurator.com
EKWB Support
PayPal

Select Your Currency

Community Poll

How many water cooled graphics cards does your computer run?