Check items to add to the cart or select all
Finally EK is ready to offer you 140 series radiators designed for hardest enthusiasts. Radiator is optimized for maximum heat dispatching even at lowest fan speeds. Choosing EK-CoolStream RAD XTC will give your watercooling system a boost you needed to cool your hot hardware.
Quality at EK level and an optimal price-performance ratio make these EK-CoolStream RAD XTC radiators unique. The new radiators feature, besides their great design and high build quality, great cooling performance.
The copper fins are specially designed for Ultra-silent fans (with low Airflow). The parallel coolant channels reduce flow resistance to a minimum. On both sides of the radiator the M3 threads are integrated to allow fan installation on both sides and radiator mounting.
The radiator has integrated G1/4" threads, allowing installation of virtually all common fittings.
Please note: Over-tightening of the screws may damage the radiator. Always take care that the screws do not damage the radiator. Damages of the product because of improper use are not covered by the warranty!
- Copper fins
- Brass chambers
Dimensions (LxWxH): 460x146x55mm
Connection threads: G1/4"
Fins/inch (FPI): 10
Fins/cm (FPC): 3,85
Weight: Approx. 1480g
Liquid Capacity: Approx. 490 ml (16,57 fl oz)
Fan installation: 4 x M3 threads on both sides each (for 3x140mm fan each)
Pressure tested: 1bar
1x EK-CoolStream RAD XTC 480 (Triple) radiator
4x M3 x 30mm DIN965 screws
4x M3 x 35mm DIN965 screws
Important: The included screws may be too long for some applications. Always be sure to screw them in only so far that the radiator is not damaged.
|End of life||No|
|# of Fans||3|
You may also be interested in the following product(s)
Incl. 20% VAT: € 29.95
Incl. 20% VAT: € 44.95
Incl. 20% VAT: € 34.94